Facebook Pixel

Nordyne 664057R 0.57" Restrictor

Special Price $14.04 Regular Price $18.25
In stock
SKU
664057R
The Nordyne 664057R Restrictor is a flow-regulating component designed to control the rate of fluid or refrigerant movement within equipment circuits. The restrictor has a calibrated opening with a size of 0.57 which restricts the flow of fluid and controlled flow through the connected lines in HVAC systems. This metered flow ensures a balanced distribution where fluid flows in and out of the system components, e.g. coils or refrigerant lines. It is located in the fluid flow of the equipment to channel flow through the fixed orifice to ensure controlled flow in the system.
Manufacturer:
https://www.partshnc.com/media/catalog/product/6/6/664057r.jpg
Manufacturer Name: Nordyne
Product Number: 664057R
OEM Part Number: 664057R
Product Description: Restrictor .57
Weight:0.01lbs/4.54g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Nordyne 664057R 0.57" Restrictor
Your Rating
Customer Questions
What maintenance is required for the Nordyne 664057R Restrictor?

Regular inspection of the restrictor ensures proper airflow and system efficiency. Keep the orifice clean from dust, debris, or blockages during routine servicing. corrosion is detected to maintain safe, stable combustion performance.

What are common issues with the Nordyne 664057R Restrictor?

  • Partial blockage leading to reduced airflow.
  • Incorrect orifice sizing causing improper fuel-air mix.
  • Pressure imbalance within system.
  • Irregular combustion or flame instability.
  • Overheating or system shutdown errors.
  • Reduced efficiency in heating cycle.

Installation Steps

Step 1: Turn off HVAC power and refrigerant flow before servicing the system.

Step 2: Locate the existing restrictor/orifice in the liquid line or coil assembly.

Step 3: Remove the old restrictor carefully, ensuring no debris enters the line.

Step 4: Install the new restrictor in the correct orientation as specified by the system design.

Step 5: Reassemble connections tightly and check sealing integrity.

Step 6: Evacuate and recharge the system, then check refrigerant pressures and cooling performance for proper operation.