Facebook Pixel

Rheem-Ruud 65-104387-04 Micro Channel Evaporator Coil

Special Price $286.78 Regular Price $318.32
In stock
SKU
65-104387-04
The Rheem-Ruud 65-104387-04 Micro Channel Evaporator Coil provides a better heat transfer rate for HVAC systems improving the cooling process. This is an enhanced coil that has microchannel to enhance the flow of refrigerant and heat transfer. It is capable of quickly collecting heat from the indoor air and effectively cooling it before releasing it to the outside conditions. It is used in air conditioning units and increases the performance and durability of the system. Advantages are increased energy efficiency, lower refrigerant charge, and a slim and lightweight cabinet for installation. It is made of aluminum, which does not easily corrode, hence making the HVAC systems last long while operating at their optimum.
https://www.partshnc.com/media/catalog/product/6/5/65-104387-04-1.jpg

Specifications

  • Type: Micro Channel Evaporator Coil
    Write Your Own Review
    You're reviewing:Rheem-Ruud 65-104387-04 Micro Channel Evaporator Coil
    Your Rating
    Customer Questions
    What maintenance is required for the Rheem-Ruud 65-104387-04 Evaporator Coil?

    Regularly inspect the coil for dust, debris, and corrosion. Clean gently with a coil cleaner or soft brush, and ensure proper airflow around the unit. Check connections for leaks and tighten as needed. Maintenance ensures efficient cooling and prevents system strain.

    What are common issues with the Rheem-Ruud 65-104387-04 Evaporator Coil?

    • Reduced cooling efficiency.
    • Refrigerant leaks.
    • Corrosion or physical damage to fins.
    • Restricted airflow due to dirt buildup.

    Installation Steps

    Step1: Turn off power and lock out/tag out before beginning.

    Step2: Recover refrigerant from the system per safety regulations.

    Step3: Remove access panel and disconnect refrigerant lines to old coil.

    Step4: Install new micro channel coil, braze or tighten connections per specs.

    Step5: Evacuate system, recharge with refrigerant, then restore power.

    Step6: Follow refrigerant handling and brazing safety precautions.