Facebook Pixel

Weil McLain 640-000-036 KIT-S DHW Temperature Sensor Kit W/Mount-C

Special Price $79.37 Regular Price $91.27
In stock
SKU
640-000-036
The Weil McLain 640-000-036 Temperature Sensor Kit-S DHW Probe Wall Mount-C is a temperature monitoring assembly designed to measure domestic hot water conditions within heating equipment. A probe-type sensor is used to detect water temperature and sends resistance-based signals by the sensor lead to the system control circuit of HVAC systems. The wall-mount probe system enable the sensing element to check the temperature of water in the domestic hot water pathway that leads to the boiler. The kit also contains the probe and mounting interface that is attached to the control board, which gives constant temperature feedback needed to control the operation of water heating.
https://www.partshnc.com/media/catalog/product/6/4/640-000-036.jpg
Manufacturer Name: Weil McLain
Product Number: 640-000-036
OEM Part Number: 640-000-036
Product Description: Kit-S Snsr Dhw Temp Wmnt-C
Weight:0.02lbs/9.07g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Weil McLain 640-000-036 KIT-S DHW Temperature Sensor Kit W/Mount-C
Your Rating
Customer Questions
What maintenance is required for the Weil-McLain 640-000-036 Temperature Sensor Kit?

Regularly inspect the sensor and wiring for corrosion, dirt, or loose connections. Clean the sensor gently and ensure proper mounting. Proper maintenance ensures accurate temperature readings and safe operation. Always disconnect power before servicing.

What are common issues with the Weil-McLain 640-000-036 Temperature Sensor Kit?

  • Erratic or inaccurate temperature readings.
  • Failure to trigger system responses.
  • Sensor damage from physical impact or moisture.
  • Improper mounting.

Installation Steps

Step 1: Turn off power to the heating system to prevent electrical hazards.

Step 2: Remove the old temperature sensor and disconnect all wiring.

Step 3: Mount the new sensor in the designated location using the supplied mount/clamp.

Step 4: Connect the sensor wiring according to the system diagram.

Step 5: Secure any loose wiring and confirm the sensor is properly seated.

Step 6: Restore power and test the sensor for accurate temperature readings.