Facebook Pixel

Nordyne 632656 Dual Pressure Switch 0.7/0.2" WC

Special Price $63.60 Regular Price $73.14
In stock
SKU
632656
The Nordyne 632656 Dual Pressure Switch is an integral part of HVAC systems that control airflow. Operating based on the principle of dual pressures, it measures changes in pressure at two points within the system. This switch has two different pressures, 0.7" WC and 0.2" WC. The switch produces electrical signal when the pressure difference gets close or goes over the pre-determined values. Commonly found in furnaces, boilers and air handling units is the Nordyne 632656 with its dual-pressure capacity that allows for accurate control of both air flow rates and system functioning which enhancing effective heating and cooling efforts.
https://www.partshnc.com/media/catalog/product/6/3/632656.jpg

Specifications

  • Type: Dual Pressure Switch
  • Pressure Range: 0.7/0.2" WC
Manufacturer Name: Nordyne
Product Number: 632656
OEM Part Number: 632656
Product Description: Dual Press Switch .7/.2 Wc
Weight:0.25lbs/113.4g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Nordyne 632656 Dual Pressure Switch 0.7/0.2" WC
Your Rating
Customer Questions
What maintenance is required for the Nordyne 632656 Dual Pressure Switch?

Regularly inspect the pressure switch and tubing for blockages, cracks, or moisture buildup. Ensure electrical connections remain tight and corrosion-free. Keep surrounding components clean to support proper airflow. Disconnect power before handling to ensure safe inspection and servicing.

What are common issues with the Nordyne 632656 Dual Pressure Switch?

  • Switch not closing during operation.
  • Switch not opening when required.
  • Intermittent switching behavior.
  • Electrical contact failure.
  • Pressure sensing inconsistency.

Installation Steps

Step 1: Turn off all power to the HVAC system before beginning.

Step 2: Locate the existing pressure switch.

Step 3: Disconnect the electrical wires from the old switch, noting their positions.

Step 4: Remove the tubing connected to the old switch.

Step 5: Mount the new switch in the same location.

Step 6: Reconnect the tubing and electrical wires securely.

Step 7: Restore power and test system operation to ensure proper functionality.