Facebook Pixel

Nordyne 632547R SPST Pressure Switch 0.90" WC

Special Price $64.15 Regular Price $73.77
In stock
SKU
632547R
The Nordyne 632547R Pressure Switch for accurate monitoring and control of airflow in HVAC systems. An SPST pressure switch that opens or closes electrical circuits based on its setting is what it is. It is designed to trigger at -0.90" WC hence fulfilling the needs of precisely controlled air draft applications. This pressure switch serves as the main component for any furnace or cooling or heating system not forgetting static pressure measurements within duct work, which ensuring proper flow rates. Whenever the pressure varies beyond the set points either way, the switch regulates other sections of the system to maintain operational efficiency.
https://www.partshnc.com/media/catalog/product/6/3/632547r.jpg

Specifications

  • Type: Pressure Switch
  • Pressure Range: -0.90" WC
  • Switch Type: SPST
Manufacturer Name: Nordyne
Product Number: 632547R
OEM Part Number: 632547R
Product Description: -0.90"Wc Spst Pressure Switch
Weight:0.21lbs/95.25g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Nordyne 632547R SPST Pressure Switch 0.90" WC
Your Rating
Customer Questions
What maintenance is required for the Nordyne 632547R Pressure Switch?

Check pressure sensing lines for leaks or obstructions to maintain accurate readings. Ensure electrical terminals are secure and free of corrosion. Periodically test switch operation to confirm proper safety response under operating conditions.

What are common issues with the Nordyne 632547R Pressure Switch?

  • Failure to close or open circuit.
  • Blocked or cracked sensing tubing.
  • Inconsistent pressure detection.
  • System short cycling.
  • Electrical contact wear or failure.

Installation Steps

Step 1: Turn off power and gas to furnace before starting installation for safety.

Step 2: Remove old pressure switch and note hose and wire connections carefully.

Step 3: Mount the new pressure switch securely in the original position.

Step 4: Reconnect tubing and electrical terminals exactly as labeled.

Step 5: Check correct pressure rating and ensure no leaks in tubing.

Step 6: Restore power and gas then test furnace operation for proper switch response.