Facebook Pixel

Nordyne 632487R SPST Pressure Switch -0.90" WC

Special Price $39.93 Regular Price $51.91
In stock
SKU
632487R
The Nordyne 632487R SPST Pressure Switch is an essential tool to measure the set air pressure of HVAC systems. This is a single-pole single-throw switch with a scale of -0.90” WC for pressure setting in HVAC systems. The pressure switch is an electrical switch, that has the capability to monitor the pressure existing within a closed compartment of a furnace or an air handler and open or close the circuit so that it remains at a safe pressure level and efficient pressure level also. It is regularly utilized in domestic and industrial systems of heating, ventilation, and air-conditioning is used in furnaces, heat pumps, and other mechanisms to regulate the flow of air and eliminate possible failures.
https://www.partshnc.com/media/catalog/product/6/3/632487r.jpg

Specifications

  • Type: Pressure Switch
  • Switch Type: SPST
  • Pressure: -0.90" WC
Manufacturer Name: Nordyne
Product Number: 632487R
OEM Part Number: 632487R
Product Description: -0.90"Wc Spst Pressure Switch
Weight:0.14lbs/63.5g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Nordyne 632487R SPST Pressure Switch -0.90" WC
Your Rating
Customer Questions
What maintenance is required for the Nordyne 632487R Pressure Switch?

Inspect tubing and pressure ports for blockages or moisture buildup to ensure accurate sensing. Check wiring connections for corrosion or looseness and secure as needed. Regular maintenance ensures accurate furnace operation and prevents unsafe ignition failures.

What are common issues with the Nordyne 632487R Pressure Switch?

  • Pressure sensing drift or inaccurate cut-in/out.
  • Blocked or cracked pressure tubing.
  • Electrical contact failure or intermittent switching.
  • Diaphragm wear causing failure to actuate.
  • False trips due to vent obstruction or weak draft.

Installation Steps

Step 1: Turn off all electrical power and ensure inducer and furnace are fully shut down.

Step 2: Remove access panel and locate the existing old pressure switch near the inducer housing.

Step 3: Label and disconnect electrical terminals and vacuum tubing for correct reassembly.

Step 4: Mount the new switch securely in the same orientation using original screws or bracket.

Step 5: Reconnect tubing to the correct ports and reattach wiring firmly to terminals.

Step 6: Restore power and check inducer creates proper draft to close switch and complete ignition sequence safely.