Facebook Pixel

Grundfos 595916 Hot Water Recirculation Pump Timer 115V UP15-10SU7P TLC

Special Price $437.33 Regular Price $485.43
In stock
SKU
595916
The Grundfos 595916 Hot Water Recirculation Pump Timer 115V UP15-10SU7P TLC is an essential part that is used in homes to allow users to have hot water at their disposal at all times. This pump operates at 115V and circulates water from the water heater to the fixtures in a continuous cycle so that hot water is not far behind. It helps in saving water usage as the user does not need to turn the tap while waiting for hot water, especially in HVAC systems where efficiency is paramount. The timer feature is a plus since it enables the pump to run only during high hours hence saving energy and time.
Manufacturer:
https://www.partshnc.com/media/catalog/product/5/9/595916_grundfos_partshnc.jpg

Specifications

  • Type: Hot Water Recirculation Pump
  • Voltage: 115V
Manufacturer Name: Grundfos
Product Number: 595916
OEM Part Number: 595916
Product Description: Up15-10Su7p Tlc 115V W/Timer
Weight:6.64lbs/3011.85g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Grundfos 595916 Hot Water Recirculation Pump Timer 115V UP15-10SU7P TLC
Your Rating
Customer Questions
What maintenance is required for the Grundfos 595916 Hot Water Recirculation Pump Timer?

Regularly inspect the pump for leaks, corrosion, and worn seals, especially around the impeller housing.Clean inlet strainer and check timer settings.Inspect electrical connections, and flush system periodically to prevent mineral scaling.

What are common issues with the Grundfos 595916 Hot Water Recirculation Pump Timer?

  • Pump fails to circulate hot water consistently due to airlocks or impeller wear.
  • Timer malfunction causes incorrect operation cycles.
  • Reduced flow from mineral buildup or partial blockage.
  • Unusual noise or vibration from worn bearings or misalignment.
  • Electrical failure preventing startup.

Installation Steps

Step 1: Turn off power to water heater and recirculation circuit; lock out supply and check no voltage before starting.

Step 2: Mount pump on hot water outlet line using proper union fittings and secure bracket.

Step 3: Connect inlet and outlet piping, ensuring correct flow direction and tighten all joints to secure from leaks.

Step 4: Plug in timer cord, set operating schedule, and ensure correct voltage rating.

Step 5: Restore power, open a nearby faucet to purge air, then test for leaks, noise, and steady circulation.