Facebook Pixel

AERCO Boiler and Water Heater 58015-01 Annual Maintenance Kit

Special Price $322.10 Regular Price $357.53
In stock
SKU
58015-01
The AERCO 58015-01 Annual Maintenance Kit is an essential maintenance kit that is specifically aimed at making the maintenance of HVAC systems easier especially those of AERCO make. This kit which is made up of nylon and plastic and contains all the parts necessary for the proper functioning and long life of the AERCO heating and hot water systems. Functionality wise, the Annual Maintenance Kit encompasses filter, gasket seal, other accessories and parts used in maintaining AERCO which are listed below. These supplies are essential to replace worn out parts, wash the part, and also conduct the necessary inspections; to keep the HVAC reliable.
https://www.partshnc.com/media/catalog/product/5/8/58015-01.jpg

Specifications

  • Weight:0.67lbs
  • Type:Annual Maintenance Kit
  • Material: Nylon,plastic
Manufacturer Name: AERCO Boiler and Water Heater
Product Number: 58015-01
OEM Part Number: 58015-01
Product Description: 24 Month Maintenance Kit
Weight:0.67lbs/303.91g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:AERCO Boiler and Water Heater 58015-01 Annual Maintenance Kit
Your Rating
Customer Questions
What maintenance is required for the AERCO Boiler and Water Heater 58015-01 Annual Maintenance Kit?

Use the kit annually to replace worn gaskets, filters, and seals in the boiler or water heater. Clean components and inspect for corrosion or buildup. Follow the included instructions carefully. Always turn off power and gas supply before maintenance for safety.

What are common issues with the AERCO Boiler and Water Heater 58015-01 Annual Maintenance Kit?

  • Missing or incorrect components in the kit.
  • Wear or damage during installation.
  • Improper fit causing leaks or performance issues.
  • Difficulty accessing parts during service.

Installation Steps

Step1: Turn off the boiler power and close the water supply valve.

Step2: Allow the system to cool completely before starting work.

Step3: Remove old maintenance components per the manual instructions.

Step4: Install the new parts from the kit, ensuring proper orientation and fit.

Step5: Tighten all connections and replace any gaskets or seals as needed.

Step6: Restore water supply and power, then check for leaks.

Step7: Run the boiler and verify proper operation following safety guidelines.