Facebook Pixel

Beckett Igniter 5270002U PowerLight Oil Burner Ignitor

Special Price $262.14 Regular Price $290.97
In stock
SKU
5270002U
The Beckett Igniter 5270002U PowerLight Burner Ignitor is a 12 VDC suitable for oil burners, including Beckett SDC and other manufacturers’ burners. This ignitor works by achieving a maximum open circuit voltage of 20kV making ignition fast and efficient without wasting energy due to its interrupted ignition mode. It is easy to install and requires less stock. The ignitor is completely encapsulated with high grade epoxy to increase thermal shock resistance and waterproofing. Advantages include enhanced efficiency, fewer replacements due to over-heating and easy wiring and suitable for HVAC systems.
https://www.partshnc.com/media/catalog/product/5/2/5270002u_beckett-igniter_partshnc.jpg

Specifications

  • Type: PowerLight Oil Burner Ignitor
    Manufacturer Name: Beckett Igniter
    Product Number: 5270002U
    OEM Part Number: 5270002U
    Product Description: Ignitor
    Weight:2.11lbs/957.08g

    Choose the best HVAC equipment parts and supplies from PartsHnC!

    • Same Day Shipping

    • Best Quality And Best Price

    • Wide Range of Inventory

    • Best Customer Service

    Have More Questions or Need Help to Place The Order?
    Reach us at (866)773-0907 or [email protected]

    Write Your Own Review
    You're reviewing:Beckett Igniter 5270002U PowerLight Oil Burner Ignitor
    Your Rating
    Customer Questions
    What maintenance is required for the Beckett 5270002U Power Light Oil Burner Ignitor?

    Inspect electrode condition and wiring connections regularly, ensuring they are clean and secure. Keep the ignitor free from oil residue and dust buildup to maintain consistent ignition performance. Always disconnect power before servicing for safety.

    What are common issues with the Beckett 5270002U Power Light Oil Burner Ignitor?

    • Ignitor failure to spark.
    • Weak or intermittent ignition.
    • Cracked or worn electrodes.
    • Overheating due to electrical fault.
    • Loose or corroded wiring connections.
    • No ignition during startup cycles.

    Installation Steps

    Step 1: Shut off electrical power and fuel supply to the oil burner, then allow unit to cool completely before starting.

    Step 2: Remove old burner access cover and document existing wiring connections for accurate reinstallation.

    Step 3: Mount the new ignitor securely in the designated position using factory hardware.

    Step 4: Connect high-voltage and ground leads according to the wiring diagram, ensuring tight, insulated connections.

    Step 5: Restore power, initiate start-up, and check ignition; shut down immediately if abnormal operation or arcing occurs.