Facebook Pixel

Rheem-Ruud 51-106543-22 1HP Variable Speed Condenser Motor 120V SelecTech Gen 3

Special Price $431.17 Regular Price $478.60
Out of stock
SKU
51-106543-22
The Rheem-Ruud 51-106543-22 1HP Variable Speed Condenser Motor is a 120V SelecTech Gen 3 drive part designed for controlled outdoor air movement in condenser assemblies. It regulates fan speed based on system demand to maintain consistent heat exchange across the coil and stabilize operating pressure. Installed on condenser units in residential and commercial cooling equipment, it operates as a key drive component that supports airflow balance and temperature control within the refrigeration cycle in HVAC systems. By adjusting rotational speed electronically, it assist maintain efficient operation and steady system performance under varying load conditions.
https://www.partshnc.com/media/catalog/product/5/1/51-106543-22-1.jpg
Write Your Own Review
You're reviewing:Rheem-Ruud 51-106543-22 1HP Variable Speed Condenser Motor 120V SelecTech Gen 3
Your Rating
Customer Questions
What maintenance is required for the Rheem-Ruud 51-106543-22 Condenser Motor?

Regularly clean the motor and surrounding area to remove dust and debris. Check electrical connections for tightness and signs of damage. Lubricate bearings if applicable and ensure proper airflow. Maintenance ensures efficient operation and prevents overheating.

What are common issues with the Rheem-Ruud 51-106543-22 Condenser Motor?

  • Motor fails to start or runs intermittently.
  • Unusual noise or vibration during operation.
  • Overheating or tripping of circuit breakers.
  • Reduced cooling efficiency due to variable speed issues.

Installation Steps

Step1: Turn off power at the breaker and lock out/tag out.

Step2: Remove condenser access panel and disconnect old motor wiring.

Step3: Detach fan blade and remove old motor from mounting.

Step4: Install new motor; align shaft and secure mounting bolts.

Step5: Reconnect wiring to matching terminals and reattach fan blade.

Step6: Restore power and test operation; follow electrical safety precautions.