Facebook Pixel

Resideo 50057547-001 Compatible Circuit Board

Special Price $69.12 Regular Price $79.49
In stock
SKU
50057547-001
The Resideo 50057547-001 is a Compatible Circuit Board an essential part of HVAC systems, which is used to regulate different operations in the unit. Being a 24 Volt circuit board, it affords the better means for controlling the operations of the HVAC system. They interact with many other components of the system such as thermostats, relays, and sensors all to provide efficient operations. The main purpose of the circuit board is to carry out the signals received from the thermostat and the other sensors, which it relays into the commands that are necessary to regulate the heating, cooling, as well as air circulation. This helps to maintain the better climate conditions and energy saving.
https://www.partshnc.com/media/catalog/product/5/0/50057547-001_resideo_partshnc.jpg

Specifications

  • Type: Circuit Board
  • Voltage: 24V
  • Applications: HVAC System
Manufacturer Name: Resideo
Product Number: 50057547-001
OEM Part Number: 50057547-001
Product Description: Circuit Board For He300
Weight:0.28lbs/127.01g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Resideo 50057547-001 Compatible Circuit Board
Your Rating
Customer Questions
What maintenance is required for the Resideo 50057547-001 Circuit Board?

Circuit board maintenance involves keeping it free from dust and moisture, ensuring secure connections, and periodic inspection for corrosion or loose wiring. Proper handling prevents electrical damage and system faults. Always disconnect power before servicing for safety.

What are common issues with the Resideo 50057547-001 Circuit Board?

  • Burnt traces or component failure due to power surges.
  • Intermittent operation or signal loss.
  • Loose solder joints causing erratic performance.
  • No response from connected system.
  • Overheating from poor ventilation or load stress.

Installation Steps

Step 1: Turn off all power to the HVAC or control system and check zero voltage.

Step 2: Open the control enclosure and document all existing wire connections before removal.

Step 3: Carefully disconnect the old circuit board, avoiding stress on harness connectors.

Step 4: Mount the new board securely using original standoffs or bracket.

Step 5: Reconnect all wiring exactly per the system schematic, ensuring tight, correct terminals.

Step 6: Restore power, run system diagnostics, and confirm normal operation without fault codes.