Facebook Pixel

Rheem-Ruud 47-102684-204 Defrost Control Board Kit

Special Price $96.42 Regular Price $110.88
In stock
SKU
47-102684-204
The Rheem-Ruud 47-102684-204 Defrost Control Board Kit is one of the components that are utilized in controlling the defrosting process of HVAC systems with special focus on heat pumps. It works at 24V, and controls the defrost cycle to avoid ice build up on the evaporator coil. It is applied in heat pump systems to control the defrosting process, It has temperature sensors that assist it in checking for ice formation and it defrosts when it is required to do so. This involves turning on the defrost heaters as well as turning off the compressor for a while in order to melt ice that has formed and this enhances heat transfer and efficiency of the system.
Manufacturer:
https://www.partshnc.com/media/catalog/product/4/7/47-102684-204.jpg

Specifications

  • Voltage: 24V
  • Weight: 0.41lbs
  • Type: Defrost Control Board Kit
Manufacturer Name: Rheem-Ruud
Product Number: 47-102684-204
OEM Part Number: 47-102684-204
Product Description: Defrost Control Board Kit
Weight:0.41lbs/185.97g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Rheem-Ruud 47-102684-204 Defrost Control Board Kit
Your Rating
Customer Questions
What maintenance is required for the Rheem-Ruud 47-102684-204 Defrost Control Board Kit?

Inspect the board for secure wiring, clean terminals, and proper mounting. Verify defrost cycle timing and sensor inputs are functioning correctly. Keep the board protected from moisture.

What are common issues with the Rheem-Ruud 47-102684-204 Defrost Control Board Kit?

  • Failure to initiate defrost cycle.
  • Excessive defrosting reducing efficiency.
  • Faulty sensor input causing incorrect timing.
  • Burnt components from voltage issues.

Installation Steps

Step 1: Turn off power at breaker to avoid electric shock and ensure safe handling.

Step 2: Remove panel cover and locate defrost control board inside unit.

Step 3: Take note of wiring for reference.

Step 4: Disconnect wiring harness carefully.

Step 5: Replace old board with new kit and secure mounting screws tightly.

Step 6: Reconnect wires per reference noto, ensuring correct terminal placement.

Step 7: Restore power and test system cycle operation.