Facebook Pixel

Slant Fin 461-024-000 Transformer 120V Primary 24V Secondary 27/3VA

Special Price $14.81 Regular Price $19.26
In stock
SKU
461-024-000
The Slant Fin 461-024-000 Transformer 27/3 VAC is a power controlling component used to convert 120V primary power to a 24V secondary supply for low-voltage circuits in HVAC systems. It supports operation of thermostats, relays, and ignition or control boards in furnaces, boilers, and air handling equipment in commercial connections. The transformer provides electrical isolation and stable reduced voltage for control circuits, ensuring consistent signaling within HVAC system operation. It is installed in units where stepping down line voltage is required for safe control circuit distribution.
https://www.partshnc.com/media/catalog/product/4/6/461-024-000_slant-fin_partshnc_2.png
Manufacturer Name: Slant Fin
Product Number: 461-024-000
OEM Part Number: 461-024-000
Product Description: 120Vpri 24Vsec 27/3Va Transfrm
Weight:1.22lbs/553.38g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Slant Fin 461-024-000 Transformer 120V Primary 24V Secondary 27/3VA
Your Rating
Customer Questions
What maintenance is required for the Slant Fin 461-024-000 Transformer?

Regularly inspect the transformer for loose wiring, corrosion, or overheating signs. Keep the unit clean and free from dust buildup to ensure proper heat dissipation. Verify voltage output periodically for performance. Always disconnect power before servicing for safety.

What are common issues with the Slant Fin 461-024-000 Transformer?

  • Inconsistent or low secondary voltage output.
  • Overheating during extended operation.
  • Humming or buzzing noises.
  • Failure due to internal coil damage.
  • Loose or degraded electrical connections.

Installation Steps

Step 1: Switch off main power and verify no voltage using a tester before starting work.

Step 2: Mount the transformer securely on a dry accessible surface inside the control panel.

Step 3: Connect primary wires to the input terminals as per wiring diagram.

Step 4: Connect secondary output to the load or control circuit carefully.

Step 5: Ensure all connections are tight insulate exposed wiring then restore power and test operation.