Facebook Pixel

Lennox 11A79 5-Ton 57,000 BTU Reciprocating Compressor R22 460V 3-Phase 60Hz POE

Special Price $1,644.27 Regular Price $1,825.14
Out of stock
SKU
11A79
The Lennox 11A79 R22 Compressor Polyol Ester 460V 3-Phase is at the center of high capacity HVAC systems, usually large commercial applications such as rooftop package units. That is a compressor it deals with the pressure of the refrigerant and moves it through the system. This refrigerant takes heat inside the house and releases it outside to create the cooling effect that is desired. This particular compressor comes with R22 refrigerant and polyol ester oil as the lubricating medium. It is powered by a strong 460V, 3-phase electrical supply at a frequency of 60Hz The machine is loaded with a cooling capacity of 57,000 BTU, or approximately 5 ton.
Manufacturer:
https://www.partshnc.com/media/catalog/product/1/1/11a79_1.jpg

Specifications

  • Voltage: 460V
  • Weight: 91lbs
  • Measure: Unit
  • Phase: 3
  • Frequency: 60 Hz
  • Capacity: 57000 BTUH
  • Tonnage: 5 Ton

Air-conditioning systems depend on compressors to establish the pressure conditions needed for refrigerants to move through the refrigeration circuit. The Lennox 11A79 is a reciprocating compressor used in compatible air-conditioning equipment with an R22 refrigerant application. Its internal compression process prepares refrigerant vapor for discharge into the higher-pressure side of the system. This function supports the cooling process by enabling the refrigeration circuit to continue through its operating stages.

RECIPROCATING COMPRESSOR OPERATION:
A reciprocating compressor uses a piston-driven compression process to reduce the volume of refrigerant vapor inside the compression chamber. As the piston moves through its operating cycle, refrigerant is drawn into the chamber and then compressed before discharge. The resulting increase in pressure prepares the refrigerant for movement into the condenser section of the system.

ELECTRICAL AND LUBRICATION REQUIREMENTS:
The 11A79 is specified for a 460V, 3-phase, 60Hz electrical supply. It is also listed for R22 refrigerant with polyol ester (POE) oil. The electrical characteristics determine the required power supply, while the refrigerant and lubricant specifications identify the operating materials associated with the compressor. These requirements should correspond with the equipment documentation for the intended application.

REPLACEMENT GUIDELINES:
Replacement may be appropriate when the 11A79 Reciprocating Compressor develops confirmed internal mechanical wear that prevents it from completing the compression process properly. It may also be appropriate when a confirmed electrical fault prevents reliable compressor operation. Before ordering, compare the complete part number with the equipment documentation and verify the required capacity, electrical supply, refrigerant, and lubricant requirements.

COMMON SIGNS OF FAILURE:

  • The compressor fails to start during an operating cycle.
  • Cooling output becomes noticeably insufficient.
  • The compressor repeatedly starts and stops.
  • Abnormal compressor noise or vibration develops.
  • Electrical protection interrupts compressor operation.

EQUIPMENT COMPATIBILITY:
The Lennox 11A79 Reciprocating Compressor should be matched with equipment requiring a reciprocating compressor with its documented application requirements. Confirm the existing compressor identification and equipment model before installation. The unit documentation should correspond with the 11A79's capacity, electrical supply, R22 refrigerant, and POE lubrication requirements.

TECHNICAL SPECIFICATIONS:
Part Identification:
Brand: Lennox
Part Number: 11A79
Product Type: Reciprocating Compressor
Capacity Performance:
Cooling Capacity: 57,000 BTU
Tonnage: 5 Ton
Electrical Specifications:
Voltage: 460V
Phase: 3-Phase
Frequency: 60Hz
Lubricant: Polyol Ester (POE)
Refrigeration Specifications:
Refrigerant: R22

Write Your Own Review
You're reviewing:Lennox 11A79 5-Ton 57,000 BTU Reciprocating Compressor R22 460V 3-Phase 60Hz POE
Your Rating
Customer Questions
What should I check before replacing the Lennox 11A79?

Compare the original part number, equipment model, compressor application, and required installation configuration with the equipment documentation.

Can another reciprocating compressor replace the 11A79?

Not automatically. The replacement must meet the equipment's capacity, R22 application, electrical, lubrication, and operating requirements.

Why is the POE lubricant requirement important?

The specified lubricant must be suitable for the compressor and refrigeration system. Confirm the required oil type before selecting or installing a replacement.

What could cause the 11A79 to make unusual noise during operation?

Possible causes include mechanical wear, mounting problems, or abnormal system operating conditions. A technician should inspect the compressor and associated components to identify the cause.

Can a 5-ton R22 compressor replace the 11A79?

Not based on tonnage and refrigerant alone. Compressor type, electrical configuration, lubrication requirements, and equipment compatibility must also be confirmed.