Facebook Pixel

Texas Furnace 4212400 3/4 HP Double Shaft Motor 1100 RPM 115V 1-Phase

Special Price $594.47 Regular Price $659.86
In stock
SKU
4212400
The Texas Furnace (Consolidated Ind) 4212400 is a replacement double-shaft motor built exclusively for Texas Furnace air handling devices and may be compatible with similar equipment from other manufacturers. It serves as an essential part of the apparatus, powering the fan blade that distributes air throughout the system. The motor has a revolving shaft at each end and is run on a 115-volt single-phase electrical source. Depending on the exact design, one shaft may be connected to a pulley system or other internal mechanisms, while the other shaft is connected to the fan blade. The linked shafts revolve in tandem with the motor's internal parts, which spin at 1100 revolutions per minute (RPM), propelling the fan blade and producing airflow.
https://www.partshnc.com/media/catalog/product/4/2/4212400_texas-furnaceconsolidated-ind_partshnc.png

A double shaft motor provides rotational drive through shaft connections extending from the motor assembly. The Texas Furnace 4212400 supplies mechanical rotation to the connected components, with its double-shaft configuration supporting assemblies that use the available shaft connections. Its output provides the mechanical movement required for the associated equipment assembly.

Electrical Characteristics:
The motor operates with a 115V, 1-phase electrical configuration. The 115V rating establishes the specified operating voltage, while the 1-phase designation defines the type of electrical supply used by the motor. These characteristics describe the electrical conditions under which the motor produces its mechanical output.

Double Shaft Mechanical Operation:
The double shaft configuration provides rotational output through shaft connections on both sides of the motor assembly. The motor is rated at 3/4 HP and 1100 RPM, defining its specified mechanical power capacity and rotational speed. These characteristics determine the mechanical output available through the shaft connections during operation.

Replacement Guidelines:
Replacement may be appropriate when the motor develops persistent deterioration in mechanical performance or when its shaft output can no longer provide dependable drive to the connected assembly. Before ordering, compare the existing part number with the applicable equipment requirements and verified specifications.

Common Failure Symptoms:

  • Motor fails to start
  • Intermittent motor operation
  • Irregular shaft rotation
  • Unusual motor noise
  • Excessive vibration

Equipment Compatibility:
The Texas Furnace 4212400 Double Shaft Motor should be matched with an application requiring the corresponding motor and shaft configuration. Before installation, compare the existing part number with the required electrical, mechanical, and shaft characteristics to confirm that the motor is appropriate for the connected assembly.

Technical Specifications:
Part Identification:
Brand: Texas Furnace (Consolidated Ind)
Part Number: 4212400
Product Type: Double Shaft Motor

Electrical:
Voltage: 115V
Phase: 1-Phase

Mechanical:
Horsepower: 3/4 HP
Speed: 1100 RPM
Shaft Configuration: Double Shaft

Write Your Own Review
You're reviewing:Texas Furnace 4212400 3/4 HP Double Shaft Motor 1100 RPM 115V 1-Phase
Your Rating
Customer Questions
What is the Texas Furnace 4212400?

The Texas Furnace 4212400 is a double shaft motor designed to provide rotational drive through its shaft connections to a connected assembly.

What is the 4212400 motor used for?

It provides the mechanical rotation required by connected components in an assembly designed for this motor configuration.

Why is the double shaft configuration important when selecting the 4212400?

The double shaft configuration is important because the connected assembly must be designed to use the motor's available shaft connections.

Is the Texas Furnace 4212400 suitable for every motor application?

No. The available information does not establish universal application, so the intended equipment and required motor configuration should be confirmed before selection.

What should I verify before ordering the 4212400?

Verify the existing 4212400 part number against the original equipment documentation and confirm the required electrical, mechanical, and shaft configuration.