Facebook Pixel

Slant Fin 400-096-000 Aquastat 140°-240°F

Special Price $83.04 Regular Price $95.49
In stock
SKU
400-096-000
The Slant Fin 400-096-000 Aquastat is a high quality control equipment that used on hydronic HVAC systems especially on boilers. This works within a temperature range of 140°F to 240°F and is used to control the water temperature for proper operation and safety of the system. Its widely used in residential & light commercial HVAC systems and is used to regulate water temperature and prevent it from getting too high. Designed for use with Slant Fin boilers and other compatible heating equipment it is a highly efficient component that easy to integrate into the hot water heating system and helps increase the life of the equipment making it a valuable addition to any heating system.
https://www.partshnc.com/media/catalog/product/4/0/400-096-000.jpg

Specifications

  • Type: Aquastat
  • Temperature: 140°F-240°F

Product Overview:
Maintaining controlled water temperatures is essential for regulating heat generation in hydronic boiler systems. The Slant Fin 400-096-000 Aquastat 140°F–240°F is a OEM temperature-responsive control component designed to monitor boiler water temperature and regulate connected heating equipment according to established temperature settings. Operating within a temperature range of 140°F to 240°F, this aquastat provides temperature-dependent electrical switching to support controlled heating operation.

Temperature Control Operation:
Operates through a temperature-sensitive switching mechanism that responds to changes in monitored boiler water temperature. When the temperature reaches a selected control threshold, the aquastat changes the state of its electrical contacts to influence the connected heating circuit. This mechanism allows the control circuit to react to measured temperature conditions.

Boiler Heating Coordination:
Supports temperature-dependent equipment operation by integrating water temperature monitoring with the boiler's electrical control system. Depending on the heating system's configuration, an aquastat may participate in burner control or other temperature-regulated functions. Its switching signals interact with the connected control circuit to coordinate heating activity according to the system's operating requirements.

Replacement Guidelines:
Replace the Slant Fin 400-096-000 Aquastat if it fails to respond to temperature changes, develops inconsistent switching behavior, or no longer regulates its connected heating circuit as intended. When selecting a replacement, compare the original control's temperature range, electrical ratings, contact configuration, and connection requirements with the intended replacement.

Common Failure Symptoms:

  • Boiler temperature regulation becomes inconsistent during heating operation.
  • Heating equipment fails to respond at selected temperature settings.
  • Aquastat electrical contacts fail to switch as expected.
  • Heating operation stops unexpectedly during normal demand.
  • Boiler water temperature exceeds the intended control setting.

Equipment Compatibility:
The Slant Fin 400-096-000 Aquastat is associated with temperature control applications in compatible Slant Fin heating equipment. Its specified 140°F–240°F temperature range is an important application characteristic, but compatibility also depends on the boiler's electrical control requirements and the aquastat's switching configuration. Refer to the equipment manufacturer's OEM parts documentation to confirm the required aquastat and its application. Verify the original part number, relevant control specifications, and manufacturer documentation before ordering.

Technical Specifications:
Brand: Slant Fin
Part Number: 400-096-000
Product Type: Aquastat
Temperature Range: 140°F–240°F

Write Your Own Review
You're reviewing:Slant Fin 400-096-000 Aquastat 140°-240°F
Your Rating
Customer Questions
What is the Slant Fin 400-096-000 Aquastat used for in hydronic boiler systems?

It monitors boiler water temperature and provides temperature-dependent electrical switching to regulate connected heating equipment.

How does the 140°F–240°F temperature range affect aquastat operation?

It defines the temperature range within which the aquastat provides temperature-responsive control for the connected heating circuit.

What role do the electrical contacts play in the Slant Fin 400-096-000 Aquastat?

The contacts change state in response to temperature conditions, allowing the connected boiler control circuit to respond.

Why is the correct aquastat switching configuration important for boiler operation?

The switching configuration must match the boiler's electrical control requirements for the aquastat to perform its intended control role.

What should be considered when selecting a replacement Slant Fin 400-096-000 Aquastat?

Compare the original aquastat's temperature range, electrical ratings, contact configuration, and connection requirements with the replacement specifications.