Facebook Pixel

Carrier 38AP660004 Electronic Expansion Valve Cable Kit

Special Price $786.96 Regular Price $873.52
In stock
SKU
38AP660004
The Carrier 38AP660004 EXV Cable Kit is a set of wires, connectors and terminals, which are connected in advance, making the installation process easier and guaranteeing correct connection of cables inside the HVAC system. It operates by offering an accurate electrical connection through which signal and power are transported to various regions in the HVAC unit. These cable kits are normally employed in line with electronic expansion valves (EXVs) in HVAC equipment, which are chargeable for regulating refrigerant and ensuring optimum performance of the system.
Manufacturer:
https://www.partshnc.com/media/catalog/product/3/8/38ap660004_carrier_partshnc.jpg

Specifications

  • Weight: 0.31lbs
  • Length 5 "
  • Width: 5 "
  • Height: 1 "
Manufacturer Name: Carrier
Product Number: 38AP660004
OEM Part Number: 38AP660004
Product Description: Exv Cable Kit
Weight:0.31lbs/140.61g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Carrier 38AP660004 Electronic Expansion Valve Cable Kit
Your Rating
Customer Questions
What maintenance is required for the Carrier 38AP660004 Expansion Valve Cable Kit?

Regularly inspect the cable for wear, fraying, or loose connections. Ensure terminals are clean and securely fastened. Avoid kinks or sharp bends, and keep the area free of moisture and debris to maintain accurate signal transmission.

What are common issues with the Carrier 38AP660004 Expansion Valve Cable Kit?

  • Intermittent signal or connection loss.
  • Corroded or loose terminals.
  • Physical damage to insulation or wiring.
  • Faulty communication with the expansion valve.

Installation Steps

Step 1: Turn off all power to the HVAC unit and verify zero voltage; apply lockout/tagout procedures.

Step 2: Access the EEV control compartment and disconnect the old cable, labeling all connectors.

Step 3: Route the new cable along the original path, avoiding sharp edges and heat sources.

Step 4: Connect harness securely to the electronic expansion valve and control board.

Step 5: Ensure all connections are fully seated and properly insulated.

Step 6: Restore power, run system test, and confirm correct operation.