Facebook Pixel

Daikin-McQuay 300049708 Inducer Fan Assembly 115V

Special Price $946.33 Regular Price $1,050.42
Out of stock
SKU
300049708
Daikin-McQuay 300049708 Inducer Fan Assembly is an essential part for HVAC systems, and it operates at a voltage of 115V. This inducer fan works under the principle of drawing a fresh air supply into the furnace while expelling hazardous combustion gases out of the home. It starts the operation before the burners ignite and clears the remaining gases, making it safer. It enhances the fresh air flow in to the combustion chamber and increases fuel economical usage and heat control. The advantages of this assembly include increased energy efficiency, better indoor air quality, safety enhancement, and the necessity for a stable and efficient heating system.
https://www.partshnc.com/media/catalog/product/3/0/300049708.jpg

Specifications

  • Type: Inducer Fan
  • Voltage: 115V
Manufacturer Name: Daikin-McQuay
Product Number: 300049708
OEM Part Number: 300049708
Product Description: Inducer Fan Assembly 115V
Weight:13.75lbs/6236.89g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Daikin-McQuay 300049708 Inducer Fan Assembly 115V
Your Rating
Customer Questions
What maintenance is required for the Daikin-McQuay 300049708 Inducer Fan Assembly?

Regularly inspect the fan blades and housing for dust, debris, or damage. Clean as needed and ensure secure mounting. Check electrical connections and wiring for signs of wear to maintain efficient airflow and safe operation.

What are common issues with the Daikin-McQuay 300049708 Inducer Fan Assembly?

  • Reduced airflow due to dirt buildup.
  • Fan blade wobble or imbalance.
  • Motor overheating or failure.
  • Noisy operation from worn bearings.

Installation Steps

Step1: Turn off power to the HVAC system for safety.

Step2: Remove the access panel to reach the existing inducer fan assembly.

Step3: Disconnect wiring and loosen mounting screws to remove the old assembly.

Step4: Position the new inducer fan assembly in place.

Step5: Secure it with mounting screws and reconnect wiring.

Step6: Ensure the assembly is properly aligned and free of obstructions.

Step7: Restore power and test the system for proper operation.