Facebook Pixel

Browning 2B74SK 2-Groove A/B Sheave Fixed Pitch

Special Price $209.13 Regular Price $232.14
In stock
SKU
2B74SK
The Browning 2B74SK Fixed pitch sheave is used with A and B-section V-belts. It has two grooves to hold several belts at a go, this increases the efficiency of power transmission and decreases the strain on belts. This sheave is used in many industry sectors, specifically in HVAC systems. Fixed pitch sheaves have a fixed groove diameter and provide a better belt and power transmission. V-shaped grooves of the sheave engage with the V-shaped belts and form a friction that in turn drives the coupled machinery. In this design, this used several belts help to reduce the chances of belt slip and increase the life of the belt.
Manufacturer:
https://www.partshnc.com/media/catalog/product/2/b/2b74sk.jpg

Specifications

  • Type: Fixed Pitch Sheave
  • Number of Groove: 2
  • Belt Sections: A&B
Manufacturer Name: Browning
Product Number: 2B74SK
OEM Part Number: 2B74SK
Product Description: 2-Groove A/B Sheave
Weight:10.88lbs/4935.08g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Browning 2B74SK 2-Groove A/B Sheave Fixed Pitch
Your Rating
Customer Questions
What maintenance is required for the Browning 2B74SK A/B Sheave Fixed Pitch?

Inspect the sheave grooves regularly for wear and debris buildup, ensuring proper belt alignment and tension. Tighten set screws and check mounting integrity. Keep surfaces clean and dry to prevent slippage and premature wear during operation.

What are common issues with the Browning 2B74SK A/B Sheave Fixed Pitch?

  • Groove wear causing belt slippage and reduced efficiency.
  • Misalignment leading to vibration and noise issues.
  • Set screw loosening resulting in wobble during operation.
  • Belt tracking inconsistency across pulley grooves.
  • Hub stress fractures under heavy load conditions.

Installation Steps

Step 1: Power down equipment and lockout/tagout all energy sources before servicing.

Step 2: Remove belt guard and existing old sheave from shaft carefully.

Step 3: Inspect shaft, keyway, and bushing; clean rust and debris.

Step 4: Install new bushing and mount sheave, ensuring correct alignment.

Step 5: Tighten set screws and hardware to manufacturer torque specification.

Step 6: Align belts and adjust tension to prevent slip or wear.

Step 7: Restore power and test operation for smooth, vibration-free running.