Facebook Pixel

Navien Tankless Water Heaters 20022322A O-Ring EPDM 029.8 X 02.4mm

Special Price $2.00 Regular Price $2.70
In stock
SKU
20022322A
The Navien Tankless Water Heaters 20022322A EPDM O-ring is a replacement part that serves the HVAC equipment used in Navien. An O-ring is an elastic ring in the shape of a torus that provides a seal between two surfaces that join each other. This particular O-ring is made of EPDM rubber which is sturdy in its ability to negotiate heat, weathering and many aggressive chemicals, which makes it suitable to use in hostile conditions within HVAC systems. This forms a close fit by occupying the interface between two neighboring parts. This reduces the breakout of fluid or gas pressure within the details of the system to avoid cases of leakage.
https://www.partshnc.com/media/catalog/product/2/0/20022322a_navien-tankless-water-heaters_partshnc.jpg

Specifications

  • Material: EPDM (Ethylene Propylene Diene Monomer)
  • Weight: 0.01lbs
  • Inner Diameter (ID): 29.8 mm
  • Cross-Section Diameter (CS): 2.4 mm
  • Temperature Range: -40°C to +150°C
Manufacturer Name: NAVIEN TANKLESS WATER HEATERS
Product Number: 20022322A
OEM Part Number: 20022322A
Product Description: 0-Ring Epdm 029.8X02.4
Weight:0.01lbs/4.54g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Navien Tankless Water Heaters 20022322A O-Ring EPDM 029.8 X 02.4mm
Your Rating
Customer Questions
What maintenance is required for the NAVIEN 20022322A O-Ring?

Regularly inspect the O-ring for cracks, deformation, or wear. Ensure it remains properly lubricated with a compatible grease to maintain a better seal. Replace immediately if damaged to prevent leaks and ensure system integrity.

What are common issues with the NAVIEN 20022322A O-Ring?

  • Cracking or splitting due to heat.
  • Compression set causing poor sealing.
  • Leaks at joints or connections.
  • Hardening or brittleness reducing flexibility.

Installation Steps

Step 1: Turn off power, gas, and water supply for safety.

Step 2: Disassemble housing and carefully remove old o-ring without scratching groove.

Step 3: Clean sealing surface and lightly lubricate new o-ring.

Step 4: Seat new o-ring evenly, ensuring no twists or pinches.

Step 5: Ensure all seals are dry and properly seated before pressurizing system.

Step 6: Reassemble, tighten connections, then restore service and check for leaks.