Facebook Pixel

Liebert 156400P1S 1/2 Inch 208/230V 2W Wtr Regulator Valve

Special Price $716.27 Regular Price $795.05
In stock
SKU
156400P1S

The Liebert 156400P1S is a water regulator valve intended for use in HVAC (Heating, Ventilation, and Air Conditioning) systems. It is a half-inch valve that uses just 2 watts of power and runs on 208/230 volts of alternating current. This valve is crucial to the HVAC system's ability to operate efficiently and perform at its best since it keeps the water pressure constant throughout. The Liebert 156400P1S can help with several advantages by accurately controlling water flow, such as increased system efficiency, lower energy usage, averting equipment damage, and longer equipment lifespan. Variations in pressure stop other system components from being stressed and harmed. The valve lowers energy usage by assisting the HVAC system in operating smoothly by maintaining constant water pressure.

Manufacturer:
https://www.partshnc.com/media/catalog/product/1/5/156400p1s.jpg
Manufacturer Name: Liebert
Product Number: 156400P1S
OEM Part Number: 156400P1S
Product Description: 1/2" 208/230V 2W Wtr Reg Valve
Weight:3.97lbs/1800.76g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Liebert 156400P1S 1/2 Inch 208/230V 2W Wtr Regulator Valve
Your Rating
Customer Questions
What maintenance is required for the Liebert 156400P1S Regulator Valve?

Inspect the valve regularly for leaks, corrosion, and scaling to ensure proper operation. Clean internal components and strainers to prevent clogging and maintain accurate water regulation. Tighten electrical and hydraulic connections safely while the system is powered off.

What are common issues with the Liebert 156400P1S Regulator Valve?

  • Water pressure fluctuation.
  • Valve sticking or jamming.
  • Electrical coil failure.
  • Internal leakage.
  • Clogging from sediment buildup.
  • Inconsistent flow regulation.

Installation Steps

Step 1: Shut down power and isolate water/refrigeration system; relieve pressure fully before servicing.

Step 2: Remove existing old valve from condenser water line, noting flow direction and sensing capillary routing.

Step 3: Install new valve in correct flow orientation and tighten fittings to secure leaks.

Step 4: Connect sensing capillary securely to designated pressure point.

Step 5: Restore system, check for leaks, and check proper head-pressure control during operation.