Facebook Pixel

Amana-Goodman 0259F00009P 15-Pin Female Wire Harness

Special Price $17.64 Regular Price $22.93
In stock
SKU
0259F00009P
Amana-Goodman 0259F00009P Wire Harness is an electrical connection component that is used to connect the control circuits between the systems. It operates by offering a 15 pin female connector, which bundles a number of wires into one harness, enabling electrical signals and power to flow between the control board and that which is attached during operation in furnace and air-handling HVAC systems. The harness is attached to the corresponding male plug in which each pin is inserted in the respective terminal and the wiring is led through the equipment control compartment. The harness can regulate the electrical communication and ensures the equipment can operate steadily because of organized signal routing.
Manufacturer:
https://www.partshnc.com/media/catalog/product/0/0/0002039_0_3.jpg
Manufacturer Name: Amana-Goodman
Product Number: 0259F00009P
OEM Part Number: 0259F00009P
Product Description: 15-Pin Wire Harness, Female
Weight:0.14lbs/63.5g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Amana-Goodman 0259F00009P 15-Pin Female Wire Harness
Your Rating
Customer Questions
What maintenance is required for the Amana-Goodman 0259F00009P Wire Harness?

Inspect the wire harness periodically for loose connections, fraying, or corrosion. Ensure secure seating in the control board and connectors. Proper maintenance prevents signal loss, improves system accuracy, and reduces electrical faults and safety hazards.

What are common issues with the Amana-Goodman 0259F00009P Wire Harness?

  • Loose connectors causing intermittent signal loss.
  • Pin corrosion leading to poor conductivity.
  • Broken or frayed wiring insulation.
  • Bent or damaged pins affecting connectivity.

Installation Steps

Step 1: Turn off power at HVAC unit and verify no voltage.

Step 2: Remove access panel and locate control board connection.

Step 3: Disconnect old harness carefully noting pin orientation.

Step 4: Align new wire harness and secure connector firmly.

Step 5: Reassemble panel and restore power to test operation.