Facebook Pixel

Rheem-Ruud 51-102500-08 1/4 HP 2-Speed Blower Motor 1075 RPM 208-230V 1-Phase 60Hz

Special Price $182.29 Regular Price $209.63
In stock
SKU
51-102500-08
The Rheem-Ruud 51-102500-08 1/4 HP 2-speed blower motor has the efficiency to improve up the HVAC systems. This motor works at 1075 RPM, is dual voltage 208V & 230V and comes with a dual-speed feature which enables it to supply air based on the requirements of the system. The motor is a 1-phase, 60Hz frequency type and the motor rotates in the anticlockwise direction to facilitate compatibility with different heating and cooling systems. It is this powerful motor that is designed to enhance operation of HVAC systems such as air conditioners, furnaces and even heat pumps. Two-speed operation allows more effective control of air distribution that leads to an enhanced level of comfort and energy consumption optimization.
https://www.partshnc.com/media/catalog/product/5/1/51-102500-08-rheem-ruud_partshnc.jpg

Specifications

  • Voltage: 208/230V
  • Horse Power(HP): 1/4
  • Speed(RPM): 1075
  • No.of Speeds: 2
  • Phase: 1
  • Frequency: 60Hz
  • Rotation: CCW
  • Weight: 12.24 Lbs

Heating and air-conditioning appliances use blower assemblies to circulate air through their connected air passages. The Rheem-Ruud 51-102500-08 is a blower motor used to operate the corresponding blower assembly. By providing the mechanical movement needed by the blower, it enables the assembly to carry out its intended air-circulation task. The motor is an integral part of the blower arrangement within the appliance.

Blower Motor Power and Rotational Characteristics:
Mechanical power and rotational speed describe the motor’s output capabilities during operation. The Rheem-Ruud 51-102500-08 is rated at 1/4 HP, identifying its specified mechanical power capacity, and 1075 RPM, indicating its rated rotational speed. These values define two key characteristics of the motor’s mechanical output.

Two-Speed Motor Operation:
A two-speed motor provides two selectable operating-speed settings rather than operating at only one fixed speed. The Rheem-Ruud 51-102500-08 uses this configuration to allow speed selection through the associated control arrangement. The selected setting determines which designated operating speed the motor uses during operation.

Replacement Guidelines:
Replacement may be appropriate when the Rheem-Ruud 51-102500-08 develops persistent deterioration in motor operation or when its two-speed operation can no longer provide dependable drive for the associated blower assembly. Before ordering, compare the existing 51-102500-08 part number with the applicable equipment requirements and verified specifications.

Common Failure Symptoms:

  • Blower motor fails to start
  • Intermittent blower operation
  • One or both speed settings fail to operate
  • Unusual motor or blower noise
  • Excessive vibration during operation

Equipment Compatibility:
The Rheem-Ruud 51-102500-08 2-Speed Blower Motor is listed for equipment models RF1P3024SPANJAB10417, RF1P3024SPANJAN00417, RF1P3024SPANJAB05417, and RH1P3017STANJA. Before replacement, compare the existing 51-102500-08 part number with the applicable equipment model information and verified electrical, mechanical, and speed requirements.

Technical Specifications:
Part Identification:
Brand: Rheem-Ruud
Part Number: 51-102500-08
Product Type: Blower Motor

Electrical:
Voltage: 208–230V
Phase: 1-Phase
Frequency: 60Hz

Mechanical:
Horsepower: 1/4 HP
Speed: 1075 RPM
Speed Configuration: 2-Speed

Write Your Own Review
You're reviewing:Rheem-Ruud 51-102500-08 1/4 HP 2-Speed Blower Motor 1075 RPM 208-230V 1-Phase 60Hz
Your Rating
Customer Questions
What type of motor is the Rheem-Ruud 51-102500-08?

The 51-102500-08 is a 2-Speed Blower Motor designed to provide rotational drive for a blower assembly.

What role does the 51-102500-08 perform in a blower assembly?

The motor supplies the rotational drive required by the blower assembly to perform its air-moving function.

Which equipment models are listed with the Rheem-Ruud 51-102500-08?

The listed equipment models are RF1P3024SPANJAB10417, RF1P3024SPANJAN00417, RF1P3024SPANJAB05417, and RH1P3017STANJA.

Can another 2-speed blower motor automatically replace the 51-102500-08?

No. A replacement should correspond with the original equipment requirements and the verified electrical, mechanical, and speed characteristics of the 51-102500-08.

How can the 51-102500-08 be verified before replacement?

Compare the existing 51-102500-08 part number with the original equipment information and verify the applicable 1/4 HP, 1075 RPM, 2-speed, 208–230V, 1-phase, and 60Hz requirements.