Facebook Pixel

Utica-Dunkirk 240008227 1/4" Flue Sensor 12K Ohms NTC

Special Price $55.17 Regular Price $63.45
In stock
SKU
240008227
The Utica-Dunkirk 240008227 1/4" Flue Sensor 12K Ohms NTC monitors flue temperature by detecting heat changes through its Negative Temperature Coefficient sensing element, which decreases in resistance as temperature rises. These resistance variations are interpreted by the control system to determine current exhaust conditions and adjust equipment operation accordingly. It is installed in HVAC systems the sensor provides data from the flue area for combustion monitoring and control response. Accurate temperature readings maintain proper communication with the controls, ensure a regulated heating cycles, and keep the equipment operating according to preset settings.
Manufacturer:
https://www.partshnc.com/media/catalog/product/2/4/240008227.jpg
Manufacturer Name: Utica-Dunkirk
Product Number: 240008227
OEM Part Number: 240008227
Product Description: 1/4" Flue Sensor 12K Ntc
Weight:0.03lbs/13.61g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Utica-Dunkirk 240008227 1/4" Flue Sensor 12K Ohms NTC
Your Rating
Customer Questions
What maintenance is required for the Utica-Dunkirk 240008227 Flue Sensor?

Inspect and clean the flue sensor to remove soot or debris affecting readings. Check wiring connections and verify resistance for accurate sensing. Power off equipment before service to ensure safety and accurate combustion performance.

What are common issues with the Utica-Dunkirk 240008227 Flue Sensor?

  • Soot buildup causing inaccurate temperature readings.
  • Intermittent or open circuit due to wiring degradation.
  • Faulty or inconsistent flue gas temperature detection.
  • Sensor failure leading to ignition lockout errors.

Installation Steps

Step 1: Turn off power and allow unit to cool completely.

Step 2: Remove old sensor from flue mount carefully.

Step 3: Install new sensor in same position, ensuring tight contact.

Step 4: Secure wiring to control board terminals as labeled.

Step 5: Restore power and test system for proper operation and readings.