Facebook Pixel

RBI Boiler 14-0059 Low Pressure Switch 0.3" WC

Special Price $47.60 Regular Price $61.88
Out of stock
SKU
14-0059
The RBI Boiler 14-0059 Low-Pressure Switch 0.3 Water Column is designed particularly for low-pressure conditions in boilers. A low pressure switch on the other hand by set standards switches on or off the boiler system for safety. This switch has a maximum load current of 15A and can function in an electrical range of 125VAC-250VAC making it suitable for high load HVAC applications. It has a functional use range of -40 degrees Fahrenheit to 140 degrees Fahrenheit thus fights most of the environmental conditions it comes across. It gives precise pressure measurement and when installed in a vertical position, it merges well with boiler systems.
https://www.partshnc.com/media/catalog/product/1/4/14-0059.jpg

Specifications

  • Weight:0.14 Lbs
  • Type: Low Pressure Switch
  • Voltage:125 VAC to 250 VAC
  • Amperge: 15A
  • Temperature Range: -40°F to 140°F
  • Mounting:Vertical
  • Switch: SPDT
Manufacturer Name: RBI Boiler
Product Number: 14-0059
OEM Part Number: 14-0059
Product Description: Low Pressure Switch .3Wc
Weight:0.14lbs/63.5g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:RBI Boiler 14-0059 Low Pressure Switch 0.3" WC
Your Rating
Customer Questions
What maintenance is required for the RBI Boiler 14-0059 Low Pressure Switch?

Regularly inspect the pressure switch for debris, moisture, and loose electrical connections. Clean ports to ensure accurate sensing and stable operation. Handle carefully to avoid damage.

What are common issues with the RBI Boiler 14-0059 Low Pressure Switch?

  • False pressure readings due to clogged sensing lines or moisture buildup.
  • Intermittent or stuck switch contacts causing erratic operation.
  • Calibration drift leading to inaccurate pressure thresholds.
  • Electrical connection failures or corrosion affecting signal accuracy.

Installation Steps

Step 1: Turn off power and shut down the system; allow the system to cool fully.

Step 2: Relieve any air or gas pressure in the sensing line before removal.

Step 3: Disconnect electrical wires and pressure sensing tubing from the old switch.

Step 4: Remove the existing switch from the mounting port.

Step 5: Install the new switch using proper thread sealant and secure mounting.

Step 6: Reconnect wiring, restore power, and test system cut-in/cut-out operation for safe system cycling.