Facebook Pixel

Rheem-Ruud 70-101087-81 Induced Draft Blower W/Gasket 120V

Special Price $270.31 Regular Price $300.04
In stock
SKU
70-101087-81
The Rheem-Ruud 70-101087-81 Induced Draft Blower is an betterpart used to improve the effectiveness of HVAC systems. This induced draft blower, which is a necessity for keeping perfect combustion in gas-fired broilers and furnaces, runs with 120V and 60 Hz. Its effective airflow ensures that the boiler or furnace will have correct venting thus minimizing chances of backdrafts and enhancing performance. Hence it can be said that this blower is a hope for all those people living in places where they can feel the great effects of climate change. There are two parts size and design size will be determined by how big your house is while design will be determined by how much air you want to allow in or out of your room at one time.
https://www.partshnc.com/media/catalog/product/7/0/70-101087-81.jpg

Specifications

  • Weight: 6.5 lbs
  • Type: Induced Draft Blower
  • Frequency: 60 Hz
  • Voltage: 120 V
  • Mounting: Direct Mount
Manufacturer Name: Rheem-Ruud
Product Number: 70-101087-81
OEM Part Number: 70-101087-81
Product Description: 120V Induced Draft Blwr W/Gskt
Weight:6.5lbs/2948.35g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Rheem-Ruud 70-101087-81 Induced Draft Blower W/Gasket 120V
Your Rating
Customer Questions
What maintenance is required for the Rheem-Ruud 70-101087-81 Induced Draft Blower?

Regularly inspect the blower for dust, debris, and signs of wear on the gasket. Clean the fan blades and housing using a soft brush or compressed air to ensure optimal airflow. Lubricate bearings if applicable, and always disconnect power before maintenance to prevent injury.

What are common issues with the Rheem-Ruud 70-101087-81 Induced Draft Blower?

  • Reduced airflow due to clogged vents.
  • Unusual vibrations or noise during operation.
  • Electrical failures or motor overheating.
  • Loose or damaged gaskets causing leaks.

Installation Steps

Step1: Turn off power to the furnace at the breaker to prevent electrical shock.

Step2: Remove the access panel and disconnect the old blower assembly.

Step3: Loosen mounting screws and remove the old blower and gasket carefully.

Step4: Clean the mounting surface before placing the new gasket.

Step5: Position the new blower with gasket and secure it with screws.

Step6: Reconnect all electrical wiring according to original setup.

Step7: Replace the access panel, restore power, and test for proper operation and airflow.