Facebook Pixel

Reznor 1036536R Natural Gas To LP Conversion Kit UDAP 30-45

Special Price $120.17 Regular Price $138.20
In stock
SKU
1036536R

The Reznor 1036536R Natural Gas to Propane Conversion Kit UDAP30-45 is a quick way to convert your Reznor UDAP30 or UDAP45 unit heater from natural gas to liquid propane LP fuel. This comprehensive kit includes all of the components required for a smooth changeover, ensuring that your heater runs safely and efficiently on propane. An LP gas regulator, valve, pilot assembly, and orifice are all essential components that have been specifically developed for propane compatibility. The straightforward instructions walk you through the conversion procedure, making it appropriate even for DIY aficionados. Using this kit provides you with the versatility and convenience of propane, which is often a more easily available and cost-effective fuel source than natural gas in some areas.

Manufacturer:
https://www.partshnc.com/media/catalog/product/1/0/1036536r.jpg
Manufacturer Name: Reznor
Product Number: 1036536R
OEM Part Number: 1036536R
Product Description: Nat To Lp Conv Kit Udap30-45
Weight:0.37lbs/167.83g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Reznor 1036536R Natural Gas To LP Conversion Kit UDAP 30-45
Your Rating
Customer Questions
What maintenance is required for the Reznor 1036536R Natural Gas To LP Conversion Kit?

Regularly inspect the conversion kit components for signs of wear, corrosion, or gas leaks. Ensure fittings remain tight and properly sealed. Periodically verify correct gas pressure and burner performance. Always follow safety procedures and shut off the gas supply before servicing.

What are common issues with the Reznor 1036536R Natural Gas To LP Conversion Kit?

  • Gas leakage due to loose or improper fittings.
  • Inconsistent burner flame or ignition problems.
  • Incorrect gas pressure is causing poor performance.
  • Compatibility issues with specific heater models.
  • Improper installation leading to operational faults.

Installation Steps

Step 1: Turn off gas and power ensure lockout/tagout.

Step 2: Shut off the gas and relieve pressure.

Step 3: Install LP orifices regulator parts per the manual.

Step 4: Adjust manifold pressure for LP.

Step 5: Reconnect leak test all fittings with soap solution.

Step 6: Restore power and check safe ignition and flame.