Facebook Pixel

Lochinvar & A.O. Smith 100327308 Coupler 3J 1/2" X 5/8"

Special Price $122.84 Regular Price $141.26
Out of stock
SKU
100327308
The Lochinvar & A.O. Smith 100327308 Coupler 3J 1/2″ X 5/8″ is a part of the heating and cooling system. Lochinvar boilers and water heaters are usually described in terms of the application of the product to make sure that the fluid is transferred efficiently and safely. This coupler is designed to withstand the pressures and temperatures that are characteristic of HVAC systems. It is most often made from brass or steel. The inlet and outlet connection sizes are 1/2”x 5/8” to enable it to fit in different piping systems. The first benefit that can be derived from using this coupler is the potential to enhance system efficiency.
Manufacturer:
https://www.partshnc.com/media/catalog/product/1/0/100327308_lochinvar--a.o.-smith_partshnc_2.png

Specifications

  • Type: Coupler
  • Size: 1/2" X 5/8"
Manufacturer Name: Lochinvar & A.O. Smith
Product Number: 100327308
OEM Part Number: 100327308
Product Description: Coupler 3J 1/2 X 5/8
Weight:0.61lbs/276.69g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Lochinvar & A.O. Smith 100327308 Coupler 3J 1/2" X 5/8"
Your Rating
Customer Questions
What maintenance is required for the Lochinvar & A.O. Smith 100327308 Coupler?

Inspect the coupler regularly for leaks, corrosion, and loose connections. Clean buildup and ensure fittings are tightened to prevent fluid or gas escape. Replace worn seals promptly and follow safety procedures during any maintenance work.

What are common issues with the Lochinvar & A.O. Smith 100327308 Coupler?

  • Leakage at connection points due to worn seals.
  • Corrosion or rust on metal surfaces reducing performance.
  • Misalignment fittings causing poor fit.
  • Thread wear or stripping leading to insecure coupling.

Installation Steps

Step 1: Turn off power and isolate the equipment to secure accidental startup.

Step 2: Access the motor and pump assembly where the coupler is installed.

Step 3: Remove guards and loosen set screws to detach the old coupler.

Step 4: Align the new coupler with both shafts and slide into place.

Step 5: Tighten set screws securely to ensure proper torque transfer.

Step 6: Reinstall guards, restore power, and test for smooth, vibration-free operation.