Lochinvar & A.O. Smith 100327113 Thermostat
Specifications
- Type: Thermostat
Loyalty ProgramProduct Overview:
Accurate temperature regulation is essential for maintaining consistent water heating and supporting reliable heater operation. The Lochinvar & A.O. Smith 100327113 Thermostat OEM is a replacement temperature-control component intended to monitor water temperature and regulate the heating cycle according to the system’s control requirements. Proper thermostat operation helps maintain the selected temperature and supports normal water-heater performance.
Heating Control:
The thermostat responds to changes in water temperature and helps control the operation of the heating system. As the water temperature reaches the thermostat's setpoint, its switching mechanism signals the heating circuit to stop or reduce heating. When the temperature falls below the required setting, the thermostat can call for heating again. This control cycle helps maintain the intended water temperature during normal equipment operation.
Replacement Guidelines:
Replace the Lochinvar & A.O. Smith 100327113 Thermostat when temperature regulation becomes inconsistent, the heating cycle fails to respond correctly, or the thermostat no longer controls water temperature as intended. Replacement may also be necessary if the control or its connections become physically damaged. Have a qualified water-heater technician inspect and replace the component.
Common Failure Symptoms:
Equipment Compatibility:
The Lochinvar & A.O. Smith 100327113 Thermostat OEM replacement component is intended for designated water-heater applications requiring this specific thermostat. Verify the existing part number, water-heater model, thermostat configuration, and connection requirements before replacement.
Technical Specifications:
Brand: Lochinvar & A.O. Smith
Part Number: 100327113
Product Type: Thermostat
Application: Water Heater Temperature Control
Step 1: Turn off power to HVAC boiler, apply lockout/tagout, and check zero voltage with tester.
Step 2: Remove old thermostat, label and disconnect wires carefully, noting wiring layout.
Step 3: Mount new thermostat base level on wall and connect wires to matching terminals, ensuring compatibility.
Step 4: Secure thermostat, tighten connections, restore power, and configure settings.
Step 5: Test heating/cooling response; ensure safe operation and observe system cycle.