Facebook Pixel

Amana-Goodman 0131M00779S 1/4HP Motor Controller ACNF25

Special Price $182.18 Regular Price $209.51
In stock
SKU
0131M00779S
The Amana-Goodman 0131M00779S 1/4HP Motor Controller ACNF25 is a quality part of HVAC systems that is used to control the motors of different systems. This motor controller for better and more efficient operation controls the speed or operation of the fan motor which is mostly used in air handling units, furnaces and air conditioners. This is done by detecting electrical impulses from the HVAC system’s control circuit board and consequently varying amperage and rpm for proper airflow and temperature management. The advantages of this motor controller are that it increases energy efficiency, decreases motor wear, and increases system reliability.
https://www.partshnc.com/media/catalog/product/0/1/0131m00779s-amana-goodman_partshnc.jpg

Specifications

  • Type: Motor Controller
  • Horse Power: 1/4HP
Manufacturer Name: Amana-Goodman
Product Number: 0131M00779S
OEM Part Number: 0131M00779S
Product Description: Acnf25 Mtr Controller 1/4 Hp
Weight:2.6lbs/1179.34g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Amana-Goodman 0131M00779S 1/4HP Motor Controller ACNF25
Your Rating
Customer Questions
What maintenance is required for the Amana-Goodman 0131M00779S Motor Controller?

Regularly inspect the motor controller for dust, corrosion, or loose connections. Clean gently with compressed air and check wiring integrity. Ensure the unit is powered off before handling to prevent electrical hazards.

What are common issues with the Amana-Goodman 0131M00779S Motor Controller?

  • Controller not powering on.
  • Intermittent motor operation.
  • Overheating of components.
  • Faulty output signals.

Installation Steps

Step1: Turn off power to the HVAC system before starting.

Step2: Remove access panel and note existing wiring on the old motor controller.

Step3: Disconnect wires and remove the old controller.

Step4: Install the new motor controller in the same position and secure with screws.

Step5: Reconnect all wires to corresponding terminals as noted.

Step6: Restore power and test motor/controller operation.