Facebook Pixel

Amana-Goodman 0130R00058 Low Pressure Switch 025/7#

Special Price $19.74 Regular Price $25.66
In stock
SKU
0130R00058
The Amana-Goodman 0130R00058 Low Pressure Switch is a secure control that is connected to the HVAC systems and refrigeration circuit to monitor the suction flow and regulate the compressor. It operates by closing the electrical circuit when the compressor pressure falls under the measured 0.25/7 PSI pressure. The switch is mounted on the low-pressure side of the system and is connected directly to the control wiring. It is used in split air conditioners, heat pumps and installed in HVAC systems to minimise operation under low refrigerant levels, airflow, or operating conditions.
https://www.partshnc.com/media/catalog/product/0/1/0130r00058_1.jpg
Manufacturer Name: Amana-Goodman
Product Number: 0130R00058
OEM Part Number: 0130R00058
Product Description: 025/7# Low Pressure Switch
Weight:0.14lbs/63.5g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Amana-Goodman 0130R00058 Low Pressure Switch 025/7#
Your Rating
Customer Questions
What maintenance is required for the Amana-Goodman 0130R00058 Low Pressure Switch?

Inspect pressure sensing port and tubing for debris or blockages affecting operation. Check electrical connections for corrosion or looseness and confirm secure mounting. Replace the switch if readings are erratic or system shows inconsistent pressure control.

What are common issues with the Amana-Goodman 0130R00058 Low Pressure Switch?

  • Blockages in pressure sensing port or tubing.
  • Electrical connection corrosion or looseness.
  • Inaccurate pressure readings or intermittent switching.
  • Failure to activate compressor or safety shutdown triggers.
  • Inconsistent pressure control causing system cycling issues.

Installation Steps

Step 1: Shut off electrical power and gas supply to the HVAC system and confirm it is fully de-energized.

Step 2: Remove access panel and locate the existing old pressure switch near the inducer assembly.

Step 3: Label and disconnect both electrical terminals and vacuum tubing carefully to avoid misrouting.

Step 4: Mount the new switch in the same orientation and ensure it is securely fastened.

Step 5: Reconnect tubing to correct ports and reattach wiring firmly to terminals.

Step 6: Restore power and test system startup, confirming proper inducer draft and safe pressure switch operation.