Facebook Pixel

Raypak 007228F LWCO Remote Sensor

Special Price $97.00 Regular Price $111.55
In stock
SKU
007228F
The Raypak 007228F Remote Sensor For LWCO is a safety device crucial for hydronic heating systems that utilize Raypak boilers. It safeguards the boiler by monitoring the water temperature leaving the unit. If the water temperature falls below a safe minimum threshold, the sensor triggers an automatic shut down of the burner to prevent overheating and potential damage to the boiler. This compact device measuring 3.1x1.1x0.8 Inches and weighing only 0.11 pounds operates on a standard 120V power supply and seamlessly connects to the boiler control board. By ensuring safe water temperature levels, the Raypak 007228F Remote Sensor For LWCO helps prevent boiler failures and extends the lifespan of your entire heating system.
https://www.partshnc.com/media/catalog/product/0/0/007228f.jpg

Specifications

  • Size: 3.1x1.1x0.8 Inch
  • Weight: 0.11lb
  • Voltage: 120V
Manufacturer Name: Raypak
Product Number: 007228F
OEM Part Number: 007228F
Product Description: Remote Sensor For Lwco
Weight:0.11lbs/49.9g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Raypak 007228F LWCO Remote Sensor
Your Rating
Customer Questions
What maintenance is required for the Raypak 007228F LWCO Remote Sensor?

Regularly inspect the sensor and wiring connections for damage, corrosion, or loose fittings. Clean any buildup that may affect readings. Proper maintenance ensures accurate low water cutoff detection and safe operation. Always turn off power before servicing to avoid electrical hazards.

What are common issues with the Raypak 007228F LWCO Remote Sensor?

  • Inaccurate water level detection or false readings.
  • Sensor signal loss due to wiring faults.
  • Corrosion affecting sensor performance.
  • Intermittent shutdowns caused by faulty connections.

Installation Steps

Step 1: Power off boiler and isolate electrical supply before starting.

Step 2: Shut off water and relieve system pressure if necessary.

Step 3: Install sensor into designated remote port on unit.

Step 4: Secure wiring connections per manufacturer wiring diagram carefully.

Step 5: Route cable away from heat sources and moisture areas.

Step 6: Restore water pressure and check for leaks.

Step 7: Restore power and test low-water cutoff alarm function safely.