Facebook Pixel

How to Clean a Goodman Furnace Blower Wheel?

Does your Goodman furnace have a noisy blower wheel? Then it’s time to remove and clean furnace blower. 

Your furnace is at work day and night, generating heat to warm your home and workspace. You can't imagine how much wear and tear the fan or blower wheel might be taking on. 

It's time for a replacement if your furnace is making a loud, excessive noise. PartsHnC is the best Goodman HVAC supply where you can find wide selection of Parts for Goodman Furnaces that are 100% reliable, and affordable.

Top Selling Products

Check out this article for tips on how to clean your Goodman furnace fan or blower wheel so that it lasts longer and saves you money on your energy bill!

Table of contents:
Goodman Furnace blower wheel cleaning: Is it worth it?
Goodman Furnace blower wheel cleaning: What to know?
How to clean the furnace Blower Wheel?
How to clean the furnace blower wheel without removing it? 
Benefits of Cleaning Furnace Blower Wheel
How often should a blower wheel be cleaned?
How much does it cost to clean a furnace blower?

Goodman Furnace blower wheel cleaning: Is it worth it?

Amana has been providing quality products and services for over a century. Their furnaces are offered in a wide range of sizes and models to fit your needs. You can count on Amana to deliver the best performance in the industry, all while offering you an unbeatable warranty. Goodman Furnace Parts are easily located for your convenience.

For a moment, let's talk about what a blower wheel is and what it does. A blower assembly, which comprises a motor and wheel, is found in your furnace. In order to heat and cool your home, the air is blown via the furnace, evaporator coil, and ductwork.

A critical, precise volume of air must be moved by the blower for the equipment to function optimally, whether your system is in the cooling or heating modes. Air movement is decreased when dirt and other materials accumulate on the blades.

Reduced airflow wastes energy by lowering heating and cooling performance. A furnace's heat exchanger and the air conditioner's compressor will both suffer harm from poor airflow. It would be quite expensive to repair either. Here are two criteria for blower wheel cleaning:

If your setup is brand-new

Since the blower wheel is clean, to begin with, use a decent filter or air cleaner to maintain its excellent condition. Have a skilled expert do a visual inspection every 2-4 years because furnace filters and air cleaners still permit some dust and debris to pass through and reach the blower wheel. It might be smart to get a pro to clean it for you if there is any buildup. That is one way to lengthen the life of your system and reduce operating costs. Or else, you can replace parts for goodman furnace to extend the longevity. 

If the system you use is older

The chances that your Blower Wheel needs cleaning are very high. An expert can disassemble the blower system, detach the wheel from the motor, and put it back together according to factory specifications. Once it has been brought back to factory specs, be sure to maintain it with the proper furnace filters. It will benefit both your HVAC system and your budget! Ensure that your Goodman furnace parts must be cleanly maintained to increase longevity by saving time and money.

Goodman Furnace blower wheel cleaning:

Undoubtedly, dirt is a furnace's worst enemy because it significantly reduces efficiency and increases fuel waste. The engine, the filter system, and the blower are the three fundamental furnace parts that are adversely affected by dirt. Regular furnace blower wheel  cleaning and maintenance will not only increase the effectiveness of your heating system but also help you save money by avoiding the need to replace your Amana Goodman furnace parts earlier than necessary.

Goodman Furnace blower wheel cleaning: What to know?

Every homeowner is in charge of Goodman furnace repair, maintaining or replacing any furnace components that are necessary for the appliance to function properly. One of the parts that must be cleaned for the furnace to remain in prime condition is the blower wheel. After several years of continuous usage, your blower wheel may become blocked with dust, which reduces the system's efficiency. 

A blower wheel is equipped with blades that are intended to force a specific volume of air into and out of the furnace system. The blower motor for Goodman furnace has to work harder to spin the wheel because these blades can catch an incredible amount of dirt. As a result, it requires more current to power the motor, which will ultimately cost you a lot of money. Your furnace's heat exchanger runs hotter due to clogged blower wheels, which can shorten its lifespan. 

Goodman is a manufacturer of high-quality automotive and industrial parts. PartsHnC offers the best products available at competitive prices. Be sure to check out the Goodman Parts and Accessories page to order the replacement you needed or enter the serial number of your product to search for instructions.

How to clean the furnace Blower Wheel?

While you may be familiar with cleaning and maintaining other components of your HVAC system, cleaning the furnace blower wheel is a difficult task that needs to be completed by a qualified specialist in order to produce the desired results.

Here is how to clean the furnace blower wheel:

  • Switch off your furnace. Make sure to unhook any electrically generated electricity or battery backup systems that supply your heater unit with power. 
  • Remove the furnace's front panel. Even though your furnace has an access door for cleaning the filter, you will probably need to remove the entire front panel to clean the Blower Assembly. You might need to remove the panel's supporting hinges or undo the screws holding it in place in order to remove the panel.
  • Remove the fan unit from the furnace by sliding it out. Most fans are attached to the furnace by a track, which makes it easy for them to glide in and out. Additionally, wire connections may be used to connect the fan. If so, before disconnecting any wires, make a note of their point of connection to the fan. As a result, putting the unit back together will be simpler.
  • Start cleaning the blower wheel. The blower can often be cleaned with basic soap and water, though you might find that a toothbrush is useful for cleaning the fan blades and the areas in between them.
  • To make sure that all the dust is taken out, lightly vacuum the fan blades and belts with a handheld vacuum. The belts can also be cleaned with a moist towel if you don't have a vacuum.
  • Reinstall the furnace's fan blower assembly. Reposition the assembly so that it fits back into the furnace once it has been fully cleaned and dried. Do this by sliding it back onto its track. In the event that you had to disconnect any wires in order to remove the assembly, reconnect them, making sure to connect them to the proper spot.
  • Following fan blower assembly cleaning, don't forget to plug your furnace back in and turn it on.

Tip: Hire a Professional HVAC contractor to handle a more difficult cleaning process. 

How to clean the furnace blower wheel without removing it? 

Cleaning the furnace blower wheel without removing it can be done effectively in a few simple steps. Here’s how to clean the furnace blower wheel without removing it: 

  • First, turn off the power to the furnace to ensure safety. 
  • Next, remove the furnace filter to access the blower wheel. 
  • Use a vacuum cleaner with a nozzle attachment to gently remove dust and debris from the wheel's surface. 
  • Be cautious not to damage the delicate fins. 
  • For stubborn dirt, a soft brush can be used. Additionally, a damp cloth can be employed to wipe down the wheel. 
  • Remember to clean the surrounding area and vacuum any loose particles. 
  • Finally, reinstall the filter, and restore power, and your furnace blower wheel will be running efficiently once again.

Regular maintenance like this can prolong the life of your HVAC system.

Benefits of Cleaning Furnace Blower Wheel

The effectiveness of your furnace might be reduced by up to 20% if there is even a slight accumulation of dirt and dust. If an effective operation is to be achieved, regular cleaning of this component is still a crucial chore that needs to be completed. The inside workings of your furnace might be thoroughly cleaned for a variety of reasons. Among them, but not exclusively, are the following:

  1. Increasing the lifespan of your furnace
  2. Lowering recurring electricity costs
  3. Improving furnace effectiveness

How often should a blower wheel be cleaned?

Depending on usage and the home, most blower wheels require removal and cleaning every three to five years. A clogged blower wheel can impair airflow in your HVAC system, overheating your heat exchanger. Additionally, it will make your system's blower motor and overall efficiency less effective.

How much does it cost to clean a furnace blower?

The typical cost of cleaning a furnace ranges from $50 to $300. Your furnace's existing condition and the amount of upkeep and maintenance required as part of the cleaning will determine the exact cost.

Goodman offers a variety of furnaces to fit your needs and offer value to you. Their systems are built with the latest technology, guaranteeing they will last as long as you need them to. With Goodman, you can be sure that the best-quality equipment is being used to provide the quality products that you expect from a leading American company. 

PartsHnC is the best place to find reliable replacement parts and accessories from well-known brands like Amana-Goodman, etc. We offer the best price with a warranty and same-day shipping. To order, simply call us at 866-963-0907 Or E-Mail: [email protected]

FAQ:

How to clean ac blower wheel without removing it?

To clean an AC blower wheel without removing it, simply turn off the power, remove the filter, and use a vacuum cleaner with a nozzle attachment to remove dust and debris from the wheel's surface. Be careful not to damage the fins.

Where can I find a replacement Goodman blower motor?

You can purchase a furnace blower motor Goodman from authorized HVAC suppliers such as PartsHnC or contact a licensed HVAC technician for assistance with sourcing and installing the right replacement motor.

What are the signs of Goodman furnace blower motor replacement?

Signs that your Goodman furnace blower motor replacement include reduced airflow, unusual noises, or the motor not starting. If you experience these issues, it's advisable to consult a professional technician for an assessment.

Please, mind that only logged in users can submit questions