Facebook Pixel
Sign-Up Bonus
Get 500 Reward Points instantly when you join.
Redeem Instantly
50 points = $1 off at checkout.
Earn as You Shop
$1 spent = 1 point every time you order.
Member Perks
Unlock exclusive member-only savings and offers.

Register and Earn 500 Reward Points
Toggle Nav
Search
Toggle Nav
Join Our Loyalty Program
main product photo

Trane FAN04206 5/8" 2-Blade Fan CW, 30.36" DIA, 18° Pitch

Rating:
5 5 1
1  Review Add Your Review
Special Price $370.19 Regular Price $537.95
In stock
SKU
FAN04206
The Trane FAN04206 2-Blade Fan is an airflow component used to control the flow of air needed in the outdoor condensing units. It has a 30.36-inch diameter, an 18-degree blade pitch, a 5/8-inch bore, and clockwise running so that the air moves across the coil of the condenser. It is installed in the condenser fan area and is considered to support the process of heat transfer through passing air over the coil surface. It assists HVAC systems in controlling the operating temperatures and stabilizing the performance of the cooling systems under normal residential and commercial cooling conditions.
Add to Wish List
Motors & Capacitors, Motors & Components
Manufacturer:
https://www.partshnc.com/media/catalog/product/f/a/fan04206.jpg
Write Your Own Review
You're reviewing:Trane FAN04206 5/8" 2-Blade Fan CW, 30.36" DIA, 18° Pitch
Your Rating
Product Questions (2)
Customer Questions
What maintenance is required for the Trane FAN04206 Fan Blade?

Regularly inspect the fan blades and hub for dust, dirt, or corrosion. Ensure all mounting bolts are tight and the blades spin freely without obstruction. Proper maintenance prevents vibration and ensures efficient airflow. Always disconnect power before servicing the fan.

What are common issues with the Trane FAN04206 Fan Blade?

  • Fan wobbling or vibration during operation.
  • Uneven airflow or reduced performance.
  • Loose or misaligned blades.
  • Bearing noise or overheating at the hub.

Installation Steps

Step 1: Turn off all power to the unit before starting to avoid injury.

Step 2: Remove the existing fan and clean the mounting hub.

Step 3: Slide the fan onto the motor shaft, ensuring the CW rotation matches system requirements.

Step 4: Align the fan blades evenly and tighten set screws securely.

Step 5: Check for proper blade clearance and balance to prevent vibration.

Step 6: Restore power and run the fan at low speed to verify smooth operation.