Facebook Pixel
Sign-Up Bonus
Get 500 Reward Points instantly when you join.
Redeem Instantly
50 points = $1 off at checkout.
Earn as You Shop
$1 spent = 1 point every time you order.
Member Perks
Unlock exclusive member-only savings and offers.

Register and Earn 500 Reward Points
Toggle Nav
Search
Toggle Nav
Join Our Loyalty Program
main product photo

Trane BLW00362 2-Stage Blower Draft Inducer Motor

Be the first to review this product
Special Price $496.78 Regular Price $721.95
In stock
SKU
BLW00362
The Trane BLW00362 Blower Draft Inducer Motor is a motorized unit in boilers and gas-fired HVAC systems to design and regulate the airflow in the heat exchanger and venting. It operates in two phases to adjust draft needs at various levels of ignition and combustion to remove flue gases from the combustion chamber and into the flue or vent. It is used in combustion, adequate evacuation of exhausts, and the steady operation of the system through ensuring that the necessary draft conditions are met in the heating cycle.
Add to Wish List
Motors & Capacitors, Motors & Components
Manufacturer:
https://www.partshnc.com/media/catalog/product/b/l/blw00362.jpg
Write Your Own Review
You're reviewing:Trane BLW00362 2-Stage Blower Draft Inducer Motor
Your Rating
Product Questions (2)
Customer Questions
What maintenance is required for the Trane BLW00362 Inducer Motor?

Regularly inspect the motor and fan assembly for dust, debris, or obstructions. Lubricate moving parts if applicable and ensure secure electrical connections. Keeping it clean and free of buildup ensures efficient airflow and safe operation.

What are common issues with the Trane BLW00362 Inducer Motor?

  • Motor failing to start or intermittent operation.
  • Unusual noises like humming or rattling.
  • Reduced airflow affecting system performance.
  • Overheating due to blocked vents or debris.

Installation Steps

Step 1: Turn off all power to the furnace before beginning installation.

Step 2: Remove the existing inducer motor and disconnect all wiring.

Step 3: Mount the new motor securely in the blower housing.

Step 4: Reconnect wiring according to the manufacturer’s diagram, ensuring correct connections for both stages.

Step 5: Verify that the motor shaft and fan assembly rotate freely without obstruction.

Step 6: Restore power and perform a test run to confirm proper operation.