Facebook Pixel
Sign-Up Bonus
Get 500 Reward Points instantly when you join.
Redeem Instantly
50 points = $1 off at checkout.
Earn as You Shop
$1 spent = 1 point every time you order.
Member Perks
Unlock exclusive member-only savings and offers.

Register and Earn 500 Reward Points
Toggle Nav
Search
Toggle Nav
Join Our Loyalty Program
main product photo

BASO Gas Products Q90FF-1 Pilot Burner Assembly & Sensor 18" Cable 0.032"

Rating:
5 5 1
1  Review Add Your Review
Special Price $92.12 Regular Price $105.94
In stock
SKU
Q90FF-1
Specifically made for natural gas systems, the BASO Q90FF-1 Pilot Assembly/Sensor is a replacement component for gas-fired HVAC systems. A flame sensor and a pilot burner are combined into one unit. During startup, the main gas burner is ignited by the pilot burner, which is a tiny, continuously burning flame. The flame sensor, which is usually a rod-shaped part that is placed close to the pilot burner, finds the pilot flame. It detects heat emitted from the flame to accomplish this. The sensor ensures safe and dependable system operation by alerting the HVAC control board when a flame is detected. The BASO Q90FF-1 weighs about 0.32 pounds and has an 18-inch long wire with a 0.32-inch diameter for simple installation.
Add to Wish List
HVAC Controls & Electrical, Control & Sensing Devices
Manufacturer:
https://www.partshnc.com/media/catalog/product/q/9/q90ff-1.jpg

Specifications

  • Cable Length: 18 Inch
  • Cable Dia: 0.32 Inch
  • Type of Gas: Natural
  • Weight:0.32lbs
Manufacturer Name: BASO Gas Products
Product Number: Q90FF-1
OEM Part Number: Q90FF-1
Product Description: Pilot Assy/Sensor 18"Cbl .032"
Weight:0.32lbs/145.15g

Choose the best HVAC equipment parts and supplies from PartsHNC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Reviews 1
Write Your Own Review
You're reviewing:BASO Gas Products Q90FF-1 Pilot Burner Assembly & Sensor 18" Cable 0.032"
Your Rating
Product Questions (2)
Customer Questions
What maintenance is required for the BASO Gas Products Q90FF-1 Pilot Burner Assembly And Sensor?

Regularly inspect the pilot burner and sensor for dirt, soot, or corrosion, and clean gently using compressed air or a soft brush. Ensure the cable connection is secure and undamaged. Proper maintenance helps ensure accurate ignition and accurate flame sensing. Always turn off gas supply before servicing.

What are common issues with the BASO Gas Products Q90FF-1 Pilot Burner Assembly And Sensor?

  • Weak or inconsistent pilot flame.
  • Sensor failing to detect flame properly.
  • Loose or damaged cable connections.
  • Ignition failure or delayed lighting.
  • Blocked or dirty pilot orifice affecting gas flow.

Installation Steps

Step 1: Turn off electrical power and shut off the gas supply to the appliance.

Step 2: Disconnect the pilot tubing, sensor cable, and ignition wire from the existing pilot assembly.

Step 3: Remove the mounting screws and take out the old pilot burner assembly.

Step 4: Install the assembly and secure it with the mounting screws.

Step 5: Reconnect the pilot tubing, sensor cable, and ignition wire.

Step 6: Restore gas and power, check for gas leaks, and verify proper ignition and flame sensing.