Facebook Pixel
Sign-Up Bonus
Get 500 Reward Points instantly when you join.
Redeem Instantly
50 points = $1 off at checkout.
Earn as You Shop
$1 spent = 1 point every time you order.
Member Perks
Unlock exclusive member-only savings and offers.

Register and Earn 500 Reward Points
Toggle Nav
Search
Toggle Nav
Join Our Loyalty Program
main product photo

Duff Norton LT225-1-150 Linear Actuator 225lb 5.9" Stroke 12 VDC

Be the first to review this product
Special Price $395.01 Regular Price $438.46
In stock
SKU
LT225-1-150
The Duff Norton LT225-1-150 12 VDC Linear Actuator is designed to move loads up to 225 lb with a 5.9-inch stroke length. It is an electromechanical part that translates rotational motion to linear motion and offers accurate push/pull force. In HVAC systems it is used to control dampers, valves and blinds for controlling airflow and temperature. Advantages include smooth operation, reliability, and ease of installation making it easy to automate the HVAC system control. It has quality construction, is reliable and can perform optimally in conditions.
Add to Wish List
Manufacturer:
https://www.partshnc.com/media/catalog/product/l/t/lt225-1-150-1.jpg

Specifications

  • Type: Linear Actuator
  • Load Capacity: 225lb
  • Stroke Length: 5.9"
  • Voltage: 12 VDC
Write Your Own Review
You're reviewing:Duff Norton LT225-1-150 Linear Actuator 225lb 5.9" Stroke 12 VDC
Your Rating
Product Questions (2)
Customer Questions
What maintenance is required for the Duff Norton LT225-1-150 Linear Actuator?

Regularly inspect the actuator for dirt, corrosion, and physical damage. Lubricate moving parts as recommended by the manufacturer. Check electrical connections for tightness and signs of wear. Always disconnect power before performing maintenance.

What are common issues with the Duff Norton LT225-1-150 Linear Actuator?

  • Actuator failing to extend or retract fully.
  • Excessive noise or vibration during operation.
  • Electrical connection or motor failure.
  • Binding or sticking due to debris or misalignment.

Installation Steps

Step 1: Disconnect power to the system to prevent injury.

Step 2: Remove any existing actuator and clear the mounting area.

Step 3: Mount the new linear actuator securely, aligning the stroke direction with the application.

Step 4: Connect the electrical wiring according to the manufacturer’s diagram.

Step 5: Verify that the actuator moves freely without obstruction.

Step 6: Restore power and test full extension and retraction under load.