Facebook Pixel

Amana-Goodman B1809913S Hot Surface Ignition Control Board W/9-Pin Connector

Special Price $190.69 Regular Price $219.29
In stock
SKU
B1809913S
The Amana-Goodman B1809913S HSI Board is an essential part for HVAC systems which is used for communication and control. This board has 9-pin connection and it is used to connect the thermostat, outdoor unit and indoor air handler. It transfers data regard, allowing accurate management of temperature, performing optimal functions, and improving diagnostic capabilities. This board helps the HVAC systems to work at their better by providing the required standards that will guarantee constant comfort with efficiency in energy use. The 9-pin connector gives a better and more secure connection, which gives a stable signal and minimizes signal interference. This HSI board is also important in the modernization of HVAC systems, which include programmable thermostats.
https://www.partshnc.com/media/catalog/product/b/1/b1809913s.png

Specifications

  • Type: HSI Board
  • Connector Pins: 9-Pin
Manufacturer Name: Amana-Goodman
Product Number: B1809913S
OEM Part Number: B1809913S
Product Description: Hsi Board W/9-Pin Connector
Weight:0.75lbs/340.19g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Amana-Goodman B1809913S Hot Surface Ignition Control Board W/9-Pin Connector
Your Rating
Customer Questions
What maintenance is required for the Amana-Goodman B1809913S Hot Surface Ignition Control Board?

Inspect the control board for dust buildup, loose connections, or signs of overheating. Ensure the connector is firmly seated and free of corrosion. Keep the area dry and well-ventilated. Always disconnect power before servicing to avoid electrical shock or component damage.

What are common issues with the Amana-Goodman B1809913S Hot Surface Ignition Control Board?

  • Failure to initiate ignition sequence or delayed startup.
  • Intermittent operation due to loose or faulty connector pins.
  • Burnt components or circuit board damage from power surges.
  • Error codes or system lockout caused by control board malfunction.

Installation Steps

Step 1: Turn off power to furnace at breaker and main disconnect switch and verify no voltage for safety.

Step 2: Carefully remove access panel and label wiring on old ignition control board.

Step 3: Disconnect connector and mounting screws, then remove faulty board, retain screws safely.

Step 4: Install new control board, secure it firmly, reconnect wiring exactly as labeled, ensure firm fit.

Step 5: Restore power, run system test cycle, observe startup, check ignition and error codes carefully.