Facebook Pixel

Rheem-Ruud 51-106546-32 3/4HP Variable Speed Condenser Motor 208-230V SelecTech Gen 3

Special Price $405.14 Regular Price $449.71
In stock
SKU
51-106546-32
The Rheem-Ruud 51-106546-32 3/4HP SelecTech Gen 3 Variable Speed Condenser Motor is designed to provide accurate airflow control in HVAC systems to enhance the cooling process. The main motor of this system is a high performance motor that can operate at variable speed depending on the demand of the system improving the efficiency. It runs at 208 – 230V and has a steady airflow that does not put pressure on the compressor, hence increasing the equipment’s durability. This is mainly for condensers, and it optimizes the temperature control and reduces energy usage. It is better for efficient HVAC performance because it has improved system durability and low noise levels.
https://www.partshnc.com/media/catalog/product/5/1/51-106546-32-1.jpg

Specifications

  • Type: Condenser
  • Series: SelecTech Gen 3
  • Horsepower: 3/4HP
  • Speed: Variable
  • Voltage: 208-230V
Write Your Own Review
You're reviewing:Rheem-Ruud 51-106546-32 3/4HP Variable Speed Condenser Motor 208-230V SelecTech Gen 3
Your Rating
Customer Questions
What maintenance is required for the Rheem-Ruud 51-106546-32 Condenser Motor?

Regularly clean the motor and condenser area to remove dust and debris. Check electrical connections and mounting for tightness. Lubricate bearings if specified, and avoid moisture exposure. Proper care ensures efficient cooling and prevents overheating or erratic operation.

What are common issues with the Rheem-Ruud 51-106546-32 Condenser Motor?

  • Inconsistent fan speeds or airflow.
  • Motor overheating or tripping breakers.
  • Excessive vibration or noise.
  • Electrical or capacitor failures.

Installation Steps

Step 1: Turn off power at breaker and verify zero voltage; discharge capacitor for safety.

Step 2: Remove condenser panel and document wiring connections, label terminals.

Step 3: Disconnect old motor, remove mounting bracket and fan blade carefully.

Step 4: Install new motor, align shaft, secure bracket and reconnect wiring per diagram.

Step 5: Reassemble, restore power, test rotation and airflow, check for vibration, verify amperage draw.