Facebook Pixel

Amana-Goodman CONT1P025240VS 1-Pole Contactor 25A 240V Coil

Special Price $34.46 Regular Price $44.80
Out of stock
SKU
CONT1P025240VS
The Amana-Goodman CONT1P025240VS 1P Contactor Coil 240V 25A is a essential component of most HVAC systems as it acts as the electrical switch that connects high current to the compressor and other large loads. It works at 240 volts which can draw a maximum of 25 amps to power loads within the residential and slight commercial HVAC units. When a low-voltage signal is received from the thermostat or control board, the contactor coil energizes and attracts the contactor’s main contacts. This action makes high current to pass through the compressor and others parts to trigger the cooling or heating process.
Manufacturer:
https://www.partshnc.com/media/catalog/product/c/o/cont1p025240vs.jpg

Specifications

  • Type: Contactor Coil
  • Number of Poles: 1
  • Voltage: 240V
  • Current: 25A
Manufacturer Name: Amana-Goodman
Product Number: CONT1P025240VS
OEM Part Number: CONT1P025240VS
Product Description: 240V Coil 1P 25Amp Contactor
Weight:0.5lbs/226.8g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Amana-Goodman CONT1P025240VS 1-Pole Contactor 25A 240V Coil
Your Rating
Customer Questions
What maintenance is required for the Amana-Goodman CONT1P025240VS Contactor?

Regularly inspect the contactor for dust, corrosion, and loose connections. Ensure terminals are tight and electrical contacts are clean. Proper maintenance prevents operational failures and overheating. Always disconnect power before servicing for safety.

What are common issues with the Amana-Goodman CONT1P025240VS Contactor?

  • Contacts sticking or pitting.
  • Coil burnout or failure.
  • Intermittent switching or buzzing noises.
  • Loose or corroded terminals causing poor electrical connection.

Installation Steps

Step 1: Turn off all power at the breaker to prevent electric shock.

Step 2: Mount the contactor securely on a stable surface or DIN rail.

Step 3: Connect the line and load wires to the correct terminals.

Step 4: Wire the control coil according to the control circuit diagram.

Step 5: Ensure all connections are tight and properly insulated.

Step 6: Replace any covers and restore power.

Step 7: Test the contactor operation, confirming proper switching.