Facebook Pixel

Price Industries 019169-008 1/2Hp 277V1Ph 1075Rpm Motor

Special Price $948.02 Regular Price $1,052.31
In stock
SKU
019169-008

The Price Industries 019169-008 is a single-phase, half-horsepower electric motor intended to operate a variety of HVAC equipment. It spins at 1075 revolutions per minute and runs at 277 volts. This motor is commonly found in compressors, pumps, blowers, and fans. Many HVAC applications choose it because of its energy efficiency, dependability, and longevity. Although I am unable to provide precise technical information or advocate using it in any specific equipment without knowing its intended use, I can tell you that the motor's features indicate that it is appropriate for HVAC system activities requiring a reasonable amount of power and speed. Its single-phase design makes wiring easier, and its energy-efficient functioning may contribute to a decrease in usage.

https://www.partshnc.com/media/catalog/product/0/1/019169-008_price-industries_partshnc_2.png
Manufacturer Name: Price Industries
Product Number: 019169-008
OEM Part Number: 019169-008
Product Description: 1/2Hp 277V1ph 1075Rpm Motor
Weight:16.23lbs/7361.8g

Choose the best HVAC equipment parts and supplies from PartsHnC!

  • Same Day Shipping

  • Best Quality And Best Price

  • Wide Range of Inventory

  • Best Customer Service

Have More Questions or Need Help to Place The Order?
Reach us at (866)773-0907 or [email protected]

Write Your Own Review
You're reviewing:Price Industries 019169-008 1/2Hp 277V1Ph 1075Rpm Motor
Your Rating
Customer Questions
What maintenance is required for the Price Industries 019169-008 Motor?

Regularly inspect the motor for dust, dirt, or debris accumulation. Lubricate bearings as recommended and check electrical connections for tightness. Ensure proper ventilation and clean cooling vents to prevent overheating and maintain efficient operation.

What are common issues with the Price Industries 019169-008 Motor?

  • Overheating or excessive vibration.
  • Electrical connection faults.
  • Bearing wear or noise.
  • Motor failing to start or running inconsistently.

Installation Steps

Step1: Turn off power and verify the circuit is fully de-energized.

Step2: Remove the existing motor and confirm the mounting frame and shaft size match.

Step3: Secure the new motor to the mounting bracket using the proper bolts and vibration washers.

Step4: Connect the wiring according to the wiring diagram and tighten terminals firmly.

Step5: Attach the fan or pulley to the motor shaft and align it with the equipment.

Step6: Restore power and test operation, shutting off immediately if unusual noise or vibration occurs.